SMUGDESK
SMUGDESK PCIe USB 3.2 Gen 2 Card 10Gbps Type A Type C Type E 19/20Pin
Adds one Type-A and one Type-C port at 10 Gbps plus a front-panel Type-E header and a 19/20-pin connector over a PCIe 3.0 x4 slot
- 10 Gbps per port via ASM3142+822 controller
- Dual power groups feed every USB connector
- Gold-plated PCIe x4 pins resist oxidation
- Front Type E plus 19/20-pin header included
- Low-profile bracket ships in the box
PCIe 3.0 expansion card with USB 3.2 Gen 2
This PCIe 3.0 add-on card uses an ASM3142 and 822 controller to provide one USB 3.2 Gen 2 Type A port, one USB 3.2 Gen 2 Type C port, a front Type E header and a 19/20-pin header. Each external port delivers up to 10 Gbps bandwidth. The card installs in an x4 slot with gold-plated contacts and includes a low-profile bracket and fixing screw.
Builders adding front-panel USB-C and Type A ports
The card suits system builders who need two high-speed external ports plus internal headers for case front-panel connectivity. It is not suited for users who require more than two external USB ports, additional internal headers beyond the Type E and 19/20-pin connectors, or a PCIe 4.0 or 5.0 host interface.
Check for a free PCIe x4 slot
Verify that your motherboard has an available PCIe 3.0 x4 slot (or larger) and that your case front panel provides matching Type E and 19/20-pin connectors. Ensure the operating system supports USB 3.2 Gen 2 without extra drivers.
Poudarki
- 10 Gbps per port via ASM3142+822 controller
- Dual power groups feed every USB connector
- Gold-plated PCIe x4 pins resist oxidation
- Front Type E plus 19/20-pin header included
- Low-profile bracket ships in the box
Specifikacije
Za ta izdelek še ni objavljenih specifikacij.
Vprašanja o tem izdelku
What PCIe slot version does my motherboard need for this 10Gbps card to run at full speed?
The card uses a PCIe 3.0 x4 interface; a PCIe 3.0 or newer slot provides the full 10Gbps bandwidth per port.
Will my older USB 3.0 or 2.0 devices work with the Type-A and Type-C ports on this card?
Yes, both external ports are backward compatible so existing USB 3.0 and 2.0 peripherals will function at their native speeds.
How can I verify each port is delivering 10Gbps after I install the card?
Check Device Manager to confirm the ASM3142+822 controller appears, then run a speed test with a USB 3.2 Gen 2 drive to see 10Gbps throughput.
Tudi v tem oddelku
Stranke so primerjale tudi te
Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.
Mushkin Enhanced 4GB DDR2-800 CL6 SoDIMM Apple 971741A memory upgrade
SK hynix HYMD232M646C6-J 256MB DDR 333MHz PC2700 CL2.5 SODIMM laptop RAM
- 4GB (2 x 2GB)



