SMUGDESK
SMUGDESK PCIe USB 3.2 Gen 2 Card 10Gbps Type A Type C Type E 19/20Pin
Adds one Type-A and one Type-C port at 10 Gbps plus a front-panel Type-E header and a 19/20-pin connector over a PCIe 3.0 x4 slot
- 10 Gbps per port via ASM3142+822 controller
- Dual power groups feed every USB connector
- Gold-plated PCIe x4 pins resist oxidation
- Front Type E plus 19/20-pin header included
- Low-profile bracket ships in the box
PCIe 3.0 expansion card with USB 3.2 Gen 2
This PCIe 3.0 add-on card uses an ASM3142 and 822 controller to provide one USB 3.2 Gen 2 Type A port, one USB 3.2 Gen 2 Type C port, a front Type E header and a 19/20-pin header. Each external port delivers up to 10 Gbps bandwidth. The card installs in an x4 slot with gold-plated contacts and includes a low-profile bracket and fixing screw.
Builders adding front-panel USB-C and Type A ports
The card suits system builders who need two high-speed external ports plus internal headers for case front-panel connectivity. It is not suited for users who require more than two external USB ports, additional internal headers beyond the Type E and 19/20-pin connectors, or a PCIe 4.0 or 5.0 host interface.
Check for a free PCIe x4 slot
Verify that your motherboard has an available PCIe 3.0 x4 slot (or larger) and that your case front panel provides matching Type E and 19/20-pin connectors. Ensure the operating system supports USB 3.2 Gen 2 without extra drivers.
I korthet
- 10 Gbps per port via ASM3142+822 controller
- Dual power groups feed every USB connector
- Gold-plated PCIe x4 pins resist oxidation
- Front Type E plus 19/20-pin header included
- Low-profile bracket ships in the box
Specifikationer
Inga publicerade specifikationer för den här produkten än.
Frågor om den här produkten
What PCIe slot version does my motherboard need for this 10Gbps card to run at full speed?
The card uses a PCIe 3.0 x4 interface; a PCIe 3.0 or newer slot provides the full 10Gbps bandwidth per port.
Will my older USB 3.0 or 2.0 devices work with the Type-A and Type-C ports on this card?
Yes, both external ports are backward compatible so existing USB 3.0 and 2.0 peripherals will function at their native speeds.
How can I verify each port is delivering 10Gbps after I install the card?
Check Device Manager to confirm the ASM3142+822 controller appears, then run a speed test with a USB 3.2 Gen 2 drive to see 10Gbps throughput.
Även i den här avdelningen
Andra har jämfört dessa
Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.
Mushkin Enhanced 4GB DDR2-800 CL6 SoDIMM Apple 971741A memory upgrade
SK hynix HYMD232M646C6-J 256MB DDR 333MHz PC2700 CL2.5 SODIMM laptop RAM
- 4GB (2 x 2GB)



