BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00281088BTC
Na zalogi
NEMIX RAM
NEMIX RAM DDR5 1.5TB 16x96GB 6400 CL52 1.1V ECC RDIMM H14DST-F memory upgrade
1.5 TB DDR5 6400 ECC registered kit with 16 modules of 96 GB each, CL52 at 1.1 V, validated for Supermicro H14DST-F
- Capacity1.5TB (16 x 96GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- Massive 1.5 TB capacity with sixteen 96 GB modules for memory-intensive workloads
- DDR5 6400 speed (PC5-51200) delivers high throughput for demanding server applications
- Registered ECC architecture corrects single-bit errors and offloads the memory controller for full-slot stability
- CL52 latency at 1.1 V balances low power draw with responsive data access
- Verified fit for Supermicro H14DST-F with 288-pin RDIMM form factor and 2Rx4 rank layout
1.5TB DDR5 ECC RDIMM kit for Supermicro H14DST-F
This 16-module kit delivers 1.5TB of registered DDR5 memory built to the exact rank, voltage and timing the Supermicro H14DST-F memory controller expects. Each 96GB module runs at DDR5-6400 with CL52 latency at 1.1V using a 2Rx4 organisation. The registered ECC design keeps every slot stable at full population while correcting single-bit errors before they affect production workloads.
Verify motherboard population rules
Server memory support varies by model and BIOS revision. Consult the Supermicro H14DST-F manual for approved DIMM population order, maximum capacity per channel and any required firmware updates before installing this 16-module kit. The board requires 288-pin registered RDIMMs; UDIMM or SODIMM modules will not fit or function.
Kit supplies sixteen matched 96GB modules only
The package contains the 16x96GB DDR5-6400 RDIMMs and no additional cables, software licences or cooling hardware. Installation follows the motherboard's documented population sequence. Lifetime replacement coverage and US-based technical support are provided by the manufacturer for the memory modules themselves.
Poudarki
- Massive 1.5 TB capacity with sixteen 96 GB modules for memory-intensive workloads
- DDR5 6400 speed (PC5-51200) delivers high throughput for demanding server applications
- Registered ECC architecture corrects single-bit errors and offloads the memory controller for full-slot stability
- CL52 latency at 1.1 V balances low power draw with responsive data access
- Verified fit for Supermicro H14DST-F with 288-pin RDIMM form factor and 2Rx4 rank layout
Specifikacije
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-9624K16 |
| Capacity | 1.5TB (16 x 96GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 1.5TB 16X96GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Vprašanja o tem izdelku
Does the 1.5TB kit contain 16 modules of 96GB each or do I need to buy additional DIMMs?
The kit ships with 16 RDIMMs at 96GB each, giving 1.5TB total; no extra modules are required for a full population.
My board only accepts registered ECC DDR5 — is this 2Rx4 CL52 1.1V kit the correct variant?
Yes, these are 288-pin registered ECC RDIMMs at DDR5-6400 CL52 1.1V 2Rx4, matching the Supermicro H14DST-F requirements.
Will the server recognise the full 1.5TB at the rated 6400 MT/s speed when all slots are filled?
The modules are spec-matched to the H14DST-F memory controller, so a fully populated system runs at DDR5-6400 with the rated CL52 timings.
Tudi v tem oddelku
Stranke so primerjale tudi te
Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.
