暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Sixteen green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM DDR5 1.5TB 16x96GB 6400 CL52 1.1V ECC RDIMM H14DST-F memory upgrade

SKU CH-RRCX-Z6VD9

1.5 TB DDR5 6400 ECC registered kit with 16 modules of 96 GB each, CL52 at 1.1 V, validated for Supermicro H14DST-F

  • Capacity1.5TB (16 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes
  • Massive 1.5 TB capacity with sixteen 96 GB modules for memory-intensive workloads
  • DDR5 6400 speed (PC5-51200) delivers high throughput for demanding server applications
  • Registered ECC architecture corrects single-bit errors and offloads the memory controller for full-slot stability
  • CL52 latency at 1.1 V balances low power draw with responsive data access
  • Verified fit for Supermicro H14DST-F with 288-pin RDIMM form factor and 2Rx4 rank layout

1.5TB DDR5 ECC RDIMM kit for Supermicro H14DST-F

This 16-module kit delivers 1.5TB of registered DDR5 memory built to the exact rank, voltage and timing the Supermicro H14DST-F memory controller expects. Each 96GB module runs at DDR5-6400 with CL52 latency at 1.1V using a 2Rx4 organisation. The registered ECC design keeps every slot stable at full population while correcting single-bit errors before they affect production workloads.

Verify motherboard population rules

Server memory support varies by model and BIOS revision. Consult the Supermicro H14DST-F manual for approved DIMM population order, maximum capacity per channel and any required firmware updates before installing this 16-module kit. The board requires 288-pin registered RDIMMs; UDIMM or SODIMM modules will not fit or function.

Kit supplies sixteen matched 96GB modules only

The package contains the 16x96GB DDR5-6400 RDIMMs and no additional cables, software licences or cooling hardware. Installation follows the motherboard's documented population sequence. Lifetime replacement coverage and US-based technical support are provided by the manufacturer for the memory modules themselves.

特長

  • Massive 1.5 TB capacity with sixteen 96 GB modules for memory-intensive workloads
  • DDR5 6400 speed (PC5-51200) delivers high throughput for demanding server applications
  • Registered ECC architecture corrects single-bit errors and offloads the memory controller for full-slot stability
  • CL52 latency at 1.1 V balances low power draw with responsive data access
  • Verified fit for Supermicro H14DST-F with 288-pin RDIMM form factor and 2Rx4 rank layout

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-9624K16
Capacity1.5TB (16 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content1.5TB 16X96GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

この商品に関する質問

Does the 1.5TB kit contain 16 modules of 96GB each or do I need to buy additional DIMMs?

The kit ships with 16 RDIMMs at 96GB each, giving 1.5TB total; no extra modules are required for a full population.

My board only accepts registered ECC DDR5 — is this 2Rx4 CL52 1.1V kit the correct variant?

Yes, these are 288-pin registered ECC RDIMMs at DDR5-6400 CL52 1.1V 2Rx4, matching the Supermicro H14DST-F requirements.

Will the server recognise the full 1.5TB at the rated 6400 MT/s speed when all slots are filled?

The modules are spec-matched to the H14DST-F memory controller, so a fully populated system runs at DDR5-6400 with the rated CL52 timings.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。