iDPRT
iDPRT SP460BT 203DPI Bluetooth USB Direct Thermal Label Printer Packaging Support
- 230 dpi
64,99 $
0.00083654BTC
Na zalogi
No Sew
No Sew Ender3-Fan MK8 Hotend Kit 24V Dual Fan 260°C 0.4mm Nozzles
Fully assembled MK8 hotend kit with dual 24V fans and four 0.4mm nozzles fits Ender 3 series printers and operates up to 260°C
- TypeFilament
- Ready-to-install assembly cuts downtime
- Dual 24V fans improve heat dissipation
- Stainless throat and aluminum block handle up to 260°C
- Includes four spare 0.4mm brass nozzles
- 24V 40W heater tube with 1m lead
Ready-to-install MK8 hotend
This fully assembled MK8 hotend kit is built as a direct replacement for Ender-3, Ender-3S and Ender-3 Pro style printers. It arrives pre-assembled so you can swap a worn or blocked hotend quickly and reduce printer downtime. The stainless-steel throat and aluminum heat block create a seamless nozzle-to-tube connection designed to help prevent leaks and clogs. It suits makers who want a drop-in upgrade without sourcing individual components.
260 °C operating ceiling
The kit is rated for an operating range of -40 °C to 260 °C, covering common filaments such as PLA, ABS and PETG within that limit. The 24 V 40 W heater cartridge with a one-metre lead brings the aluminum block to temperature rapidly. Dual 24 V 4010 fans — a blower and a cooling fan — dissipate heat efficiently to support steadier extrusion during longer prints. Pushing beyond 260 °C exceeds the rated thermal limit of the supplied throat and block.
0.4 mm brass nozzle constraint
The included 0.4 mm brass nozzle sets the practical extrusion width and limits abrasive filament use; brass wears quickly with carbon-fibre or glow-in-the-dark materials. Four spare 0.4 mm nozzles are provided, but no alternative diameters are included in the box. The M6 × 27 mm stainless-steel throat fixes the heat-break geometry, so swapping to a different hotend architecture would require a new mounting arrangement. Users needing larger layer heights or abrasive-rated nozzles must source those parts separately.
Poudarki
- Ready-to-install assembly cuts downtime
- Dual 24V fans improve heat dissipation
- Stainless throat and aluminum block handle up to 260°C
- Includes four spare 0.4mm brass nozzles
- 24V 40W heater tube with 1m lead
Specifikacije
| Model | Ender3-Fan |
|---|---|
| Part Number | Ender3-Fan |
| Type | Filament |
Vprašanja o tem izdelku
Will the 24V 40W heater tube and dual 4010 fans connect to my Ender-3 Pro board without changes?
Yes, the kit is built for Ender-3, Ender-3S and Ender-3 Pro style setups and uses 24V components that match the stock wiring.
How can I confirm the hotend is reaching 260°C correctly after fitting it?
Preheat to your target temperature on the printer display and watch the reading stabilise; a smooth first-layer extrusion without clicking or under-extrusion shows the 24V 40W heater and dual 4010 fans are working together.
Does the box include everything I need to swap the hotend, or must I buy nozzles or a silicone sock separately?
The box contains the fully assembled hotend with 0.4mm brass nozzle, 24V 40W heater tube, dual 24V 4010 fans with covers, mounting hardware, four extra 0.4mm nozzles and a black silicone sock — no extra parts required.
Tudi v tem oddelku
Stranke so primerjale tudi te
Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.
