NZXT CM-H92FW-01 H9 Flow PC case White
- White
- SGCC / Tempered Gla…
Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.
NZXT
A dual-chamber ATX mid-tower with wraparound tinted tempered glass, ultra-fine mesh panels, three pre-installed 140 mm side fans and one 120 mm rear fan.
Model H9 Flow (2025)
The NZXT H9 Flow CM-H92FB-01 is a black mid-tower case built around a dual-chamber layout that separates the motherboard tray from the power-supply and drive zone. Two wraparound tinted tempered-glass panels expose the interior while keeping cables hidden in the rear compartment. It accepts ATX, E-ATX, Micro-ATX and Mini-ITX boards and provides seven expansion slots for full-length add-in cards.
Ultra-fine mesh covers the top, front-right and side panels to feed the three pre-installed 140 mm side fans and single 120 mm rear fan without restrictive grilles. The mesh filters dust while allowing high-volume intake that keeps component temperatures stable during extended gaming or rendering sessions. Additional mounts support up to three 120 mm or 140 mm fans at the top and bottom for custom loop or air-cooling upgrades.
Maximum graphics-card length reaches 459 mm when slim fans under 56 mm thick occupy the front-right, dropping to 410 mm if a 420 mm radiator with 56 mm fans is fitted there. CPU cooler height is capped at 165 mm, and the power-supply bay accommodates units up to 200 mm deep. Two 3.5-inch and six 2.5-inch drive bays handle storage without intruding on the main airflow path.
| Brand | NZXT |
|---|---|
| Model | CM-H92FB-01 |
| Color | Black |
| Case Material | tinted tempered glass |
| Motherboard Compatibility | ATX / E-ATX / Micro ATX / Mini ITX |
| Side Panel | 2 x Sides Tempered Glass Panel |
| Internal 3.5" Drive Bays | 2 |
| Internal 2.5" Drive Bays | 6 |
| Expansion Slots | 7 |
| Fan Options | Bottom - 3 x 120mm / Bottom - 3 x 140mm / Rear - 1 x 120mm / Top - 3 x 120mm / Top - 3 x 140mm |
| Pre-installed Fans | Rear - 1 x 120mm / Side - 3 x 140mm |
| Max GPU Length | "Up to 459 mm (with <56 mm thickness fans installed at the front-right) Up to 410 mm (with 56 mm thick 420 mm AIO and fans installed at the front-right)" |
| Max CPU Cooler Height | 165 mm |
| Max PSU Length | 200 mm |
| Dimensions | 19.9" x 12.4" x 18.9" |
| Teža pošiljke | 15.42 kg |
| Velikost pošiljke | 584 × 584 × 406 mm |
Druge različice tega modela
Ista družina, različen pomnilnik, hladilnik ali takt — primerjajte, preden se odločite.
The three 140 mm side fans and one 120 mm rear fan are factory-fitted and angled for steady airflow, keeping thermals low without aggressive speeds during extended use.
Any ATX, E-ATX, Micro ATX or Mini ITX board fits, and the PSU can be up to 200 mm long in the separate lower chamber.
Yes, the GPU clears up to 459 mm with slim front-right fans, the cooler height limit is 165 mm, and two 3.5" bays remain available.
Tudi v tem oddelku
Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.
V čem plačujete in v čem berete cene.
Poslano iz Vaše denarnice ob blagajni
Samo za prikaz — katalog je cenovno izražen v dolarjih
Nobena valuta ne ustreza.
Izberite jezik, v katerem Vam govori spletna stran.
Prvič tu?
Že imate račun?
Samodejne ponastavitve ni: ta trgovina ne pošilja e-pošte, zato ni enkratne povezave, ki bi jo lahko zahtevali. Pustite naslov na računu — nekdo ga bo obravnaval ročno.
Zahteva zabeležena
V Vašo elektronsko pošto ne prihaja nič — ta trgovina ne pošilja nobene e-pošte. Zahteve nekdo obravnava ročno.
Ste se spomnili?