Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava

OEM Industries

OEM Industries DELTA AFB0912HH F00 90x20mm 12V 0.4A 4-Pin CPU cooler

SKU CH-4CQN-CYJHF

A 90 mm square fan with ball bearing, 12 V 0.4 A PWM control and four-pin connector for CPU or case cooling

  • ColorBlack
  • TypeFan only
  • Fan Size90mm
  • Bearing TypeBall
  • Power Connector4 Pin
  • LEDNo
  • PWM control adjusts speed via 4-pin connector
  • 90mm square frame fits standard 9020 mounting holes
  • Ball bearing reduces friction for long service life
  • 12V 0.4A draw keeps power use low
  • Fan-only design lets you choose any heatsink

90mm PWM fan for compact CPU cooling

This 90mm square cooler from DELTA fits tight CPU sockets where taller towers cannot. The AFB0912HH F00 model runs on 12V at 0.4A and targets builders assembling small-form-factor or replacement systems. Its black frame and absent LEDs keep the look neutral inside any chassis.

Four-pin connector enables direct motherboard

The 4-wire PWM header plugs straight onto a standard CPU fan header so speed adjusts automatically with temperature. Ball bearings reduce startup friction but can develop audible whine after extended use. No mounting hardware is included, so verify your retention bracket matches the 90x20mm footprint before purchase.

90x20mm frame limits airflow versus larger coolers

The 20mm thickness and 90mm blade diameter restrict static pressure, making this fan suited to low-TDP processors rather than high-heat loads. PWM control cannot overcome the physical ceiling of the smaller impeller. Systems demanding sustained heavy loads will need a larger heatsink or liquid loop.

Poudarki

  • PWM control adjusts speed via 4-pin connector
  • 90mm square frame fits standard 9020 mounting holes
  • Ball bearing reduces friction for long service life
  • 12V 0.4A draw keeps power use low
  • Fan-only design lets you choose any heatsink

Specifikacije

ModelAFB0912HH
ColorBlack
TypeFan only
Fan Size90mm
Bearing TypeBall
Power Connector4 Pin
LEDNo

Vprašanja o tem izdelku

How do I confirm the AFB0912HH F00 is running correctly after installation?

The 4-pin PWM connector lets the motherboard report real-time RPM in BIOS or monitoring software; a steady reading that changes with load shows the ball-bearing fan is spinning as intended.

What comes in the box and what must I source separately?

The package contains the 90x20mm DELTA fan with its 4-wire lead; mounting screws, a heatsink base or PWM fan hub are not included and must be purchased if your build needs them.

Which version of this cooler should I choose for a 12V 0.4A header?

The AFB0912HH F00 is the only model listed and it is rated 12V 0.4A, so it matches a standard 4-pin CPU fan header without needing a different variant.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.