Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Black 90mm square CPU fan with 4-pin connector

OEM Industries

OEM Industries DELTA AFB0912HH F00 90x20mm 12V 0.4A 4-Pin CPU cooler

SKU CH-4CQN-CYJHF

A 90 mm square fan with ball bearing, 12 V 0.4 A PWM control and four-pin connector for CPU or case cooling

  • ColorBlack
  • TypeFan only
  • Fan Size90mm
  • Bearing TypeBall
  • Power Connector4 Pin
  • LEDNo
  • PWM control adjusts speed via 4-pin connector
  • 90mm square frame fits standard 9020 mounting holes
  • Ball bearing reduces friction for long service life
  • 12V 0.4A draw keeps power use low
  • Fan-only design lets you choose any heatsink

90mm PWM fan for compact CPU cooling

This 90mm square cooler from DELTA fits tight CPU sockets where taller towers cannot. The AFB0912HH F00 model runs on 12V at 0.4A and targets builders assembling small-form-factor or replacement systems. Its black frame and absent LEDs keep the look neutral inside any chassis.

Four-pin connector enables direct motherboard

The 4-wire PWM header plugs straight onto a standard CPU fan header so speed adjusts automatically with temperature. Ball bearings reduce startup friction but can develop audible whine after extended use. No mounting hardware is included, so verify your retention bracket matches the 90x20mm footprint before purchase.

90x20mm frame limits airflow versus larger coolers

The 20mm thickness and 90mm blade diameter restrict static pressure, making this fan suited to low-TDP processors rather than high-heat loads. PWM control cannot overcome the physical ceiling of the smaller impeller. Systems demanding sustained heavy loads will need a larger heatsink or liquid loop.

Punti di forza

  • PWM control adjusts speed via 4-pin connector
  • 90mm square frame fits standard 9020 mounting holes
  • Ball bearing reduces friction for long service life
  • 12V 0.4A draw keeps power use low
  • Fan-only design lets you choose any heatsink

Caratteristiche tecniche

ModelAFB0912HH
ColorBlack
TypeFan only
Fan Size90mm
Bearing TypeBall
Power Connector4 Pin
LEDNo

Domande su questo articolo

How do I confirm the AFB0912HH F00 is running correctly after installation?

The 4-pin PWM connector lets the motherboard report real-time RPM in BIOS or monitoring software; a steady reading that changes with load shows the ball-bearing fan is spinning as intended.

What comes in the box and what must I source separately?

The package contains the 90x20mm DELTA fan with its 4-wire lead; mounting screws, a heatsink base or PWM fan hub are not included and must be purchased if your build needs them.

Which version of this cooler should I choose for a 12V 0.4A header?

The AFB0912HH F00 is the only model listed and it is rated 12V 0.4A, so it matches a standard 4-pin CPU fan header without needing a different variant.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.