Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Green printed circuit board with black memory chips and gold edge connectors

OWC

OWC 4GB DDR3 1600 CL11 2Rx8 240-pin 1.5V Non-ECC UDIMM for HP 100B 6300 Pro SFF Tower

SKU CH-3RY4-ZDT8M

4GB DDR3 1600 CL11 240-pin 1.5V non-ECC UDIMM upgrades HP 100B and 6300 Pro SFF or Tower systems

  • Capacity4GB
  • Type240-Pin DDR3 Non-ECC UDIMM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.5V
  • ECCNo
  • Boosts system responsiveness with 4 GB DDR3 1600 MHz module
  • Meets JEDEC and RoHS standards for warranty-safe upgrade
  • Low 1.5 V voltage reduces power draw and heat
  • Unbuffered 240-pin DIMM installs easily in HP 6300 Pro SFF or Tower
  • Single 2Rx8 rank design ensures stable multitasking performance

Single-module DDR3 upgrade

This OWC 4GB DDR3 1600 CL11 2Rx8 240-pin 1.5V Non-ECC UDIMM is a direct memory upgrade for HP 100B, 6300 Pro SFF and 6300 Pro Tower desktops. The module follows JEDEC-standard PC3-12800 timing and runs at 1.5 volts without a heat spreader. It is supplied new and carries OWC's limited lifetime warranty.

Fits the three listed HP desktops.

Builders who own an HP 100B, 6300 Pro SFF or 6300 Pro Tower can install this stick to add 4GB of capacity. Buyers with a different motherboard, a laptop, a server or any machine that requires ECC or registered DIMMs should look elsewhere because the pin-out and voltage are specific to the supported models.

240-pin DDR3 UDIMM form factor

The module uses the 240-pin DDR3 UDIMM form factor, which physically fits only slots designed for that generation. A system that accepts DDR3 1600 non-ECC unbuffered memory will recognise the stick; a board keyed for another memory type will not accept it.

Poudarki

  • Boosts system responsiveness with 4 GB DDR3 1600 MHz module
  • Meets JEDEC and RoHS standards for warranty-safe upgrade
  • Low 1.5 V voltage reduces power draw and heat
  • Unbuffered 240-pin DIMM installs easily in HP 6300 Pro SFF or Tower
  • Single 2Rx8 rank design ensures stable multitasking performance

Specifikacije

BrandOWC
Part Number1U6D32R804GB
Capacity4GB
Type240-Pin DDR3 Non-ECC UDIMM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemHP 100B
HP 6300 Pro SFF
HP 6300 Pro Tower

Druge različice tega modela

še 5 v isti paleti

Ista družina, različen pomnilnik, hladilnik ali takt — primerjajte, preden se odločite.

Vprašanja o tem izdelku

How much power does the 1.5 V DDR3 1600 module draw when the system runs all day?

The module operates at the standard 1.5 V JEDEC voltage for DDR3 1600, so power draw stays within the normal range for a 4 GB unbuffered DIMM under continuous load.

What must the HP 6300 Pro SFF or Tower already have for this 240-pin UDIMM to work?

The desktop needs a free 240-pin DDR3 slot and a BIOS that accepts 4 GB 2Rx8 non-ECC modules at 1600 MHz.

Will this CL11 2Rx8 stick run correctly alongside the original HP memory in a 6300 Pro?

Yes, it is tested to meet OEM specs for the 6300 Pro SFF and Tower, so it will operate at the common 1600 MHz speed with the factory-installed DIMMs.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.