Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Green rectangular DDR4 memory module with black chips and gold edge contacts

OWC

OWC 8GB DDR4 2133MHz CL15 1.2V 288pin UDIMM memory upgrade

SKU CH-WGY4-9ET61

8GB DDR4 2133MHz CL15 UDIMM for HP ProDesk 400 G3, 490 G3 and 600 G2 systems

  • Capacity8GB
  • Type288-Pin DDR4 Non-ECC UDIMM
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.2V
  • ECCNo
  • 8GB capacity expands multitasking headroom for daily workloads
  • 2133MHz DDR4 speed matches HP ProDesk 400 G3, 490 G3 and 600 G2 specifications
  • CL15 latency at 1.2V delivers efficient responsive performance
  • 288-pin UDIMM form factor fits desktop DIMM slots without adapters
  • JEDEC and RoHS compliant for warranty-safe upgrade confidence

Compatible HP ProDesk upgrade

This 8GB DDR4 module is built for HP ProDesk 400 G3 SFF, 400 G3 Tower, 490 G3, 600 G2 SFF and 600 G2 Tower systems. It targets owners of those desktops who need a straightforward capacity increase without configuration changes. The unbuffered, non-ECC design matches the original factory specification for these platforms.

Sustained-load behaviour

Rated at 2133MHz with CL15 latency and 1.2V operation, the module delivers steady throughput during long work sessions. JEDEC compliance ensures timing and voltage remain stable when the system runs continuously under multi-tasking loads. The 2Rx8 organisation supports consistent bandwidth without throttling.

Installation experience

The 288-pin UDIMM form factor drops into the standard desktop DIMM slots on the listed ProDesk models. No heat spreader means the module fits tight SFF chassis without clearance issues. The most common mistake is mixing this stick with existing modules of different speed or rank, which can prevent the system from posting.

Poudarki

  • 8GB capacity expands multitasking headroom for daily workloads
  • 2133MHz DDR4 speed matches HP ProDesk 400 G3, 490 G3 and 600 G2 specifications
  • CL15 latency at 1.2V delivers efficient responsive performance
  • 288-pin UDIMM form factor fits desktop DIMM slots without adapters
  • JEDEC and RoHS compliant for warranty-safe upgrade confidence

Specifikacije

BrandOWC
Part Number2U1D42R808GB
Capacity8GB
Type288-Pin DDR4 Non-ECC UDIMM
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemHP ProDesk 400 G3 SFF
HP ProDesk 400 G3 Tower
HP ProDesk 490 G3
HP ProDesk 600 G2 SFF
HP ProDesk 600 G2 Tower

Druge različice tega modela

še 5 v isti paleti

Ista družina, različen pomnilnik, hladilnik ali takt — primerjajte, preden se odločite.

Vprašanja o tem izdelku

How much heat does the 1.2V DDR4 2133MHz module add when running all day?

At 1.2V the stick draws minimal power, so it adds very little heat inside an HP ProDesk 400 G3 or 600 G2 chassis during continuous use.

Does my HP ProDesk 400 G3 Tower already have a free 288-pin DDR4 slot for this 8GB UDIMM?

The module fits any empty 288-pin DDR4 slot in the listed HP ProDesk 400 G3, 490 G3 and 600 G2 systems.

Will this CL15 DDR4 2133MHz stick run stably alongside the original memory in a ProDesk 600 G2 SFF?

Yes — it meets JEDEC DDR4 2133 CL15 specs, so it will down-clock to match existing modules and run without errors.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.