Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Green rectangular DDR4 memory module with black chips and gold edge contacts

OWC

OWC 8GB DDR4 2133MHz CL15 1.2V 288pin UDIMM memory upgrade

SKU CH-WGY4-9ET61

8GB DDR4 2133MHz CL15 UDIMM for HP ProDesk 400 G3, 490 G3 and 600 G2 systems

  • Capacity8GB
  • Type288-Pin DDR4 Non-ECC UDIMM
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.2V
  • ECCNo
  • 8GB capacity expands multitasking headroom for daily workloads
  • 2133MHz DDR4 speed matches HP ProDesk 400 G3, 490 G3 and 600 G2 specifications
  • CL15 latency at 1.2V delivers efficient responsive performance
  • 288-pin UDIMM form factor fits desktop DIMM slots without adapters
  • JEDEC and RoHS compliant for warranty-safe upgrade confidence

Compatible HP ProDesk upgrade

This 8GB DDR4 module is built for HP ProDesk 400 G3 SFF, 400 G3 Tower, 490 G3, 600 G2 SFF and 600 G2 Tower systems. It targets owners of those desktops who need a straightforward capacity increase without configuration changes. The unbuffered, non-ECC design matches the original factory specification for these platforms.

Sustained-load behaviour

Rated at 2133MHz with CL15 latency and 1.2V operation, the module delivers steady throughput during long work sessions. JEDEC compliance ensures timing and voltage remain stable when the system runs continuously under multi-tasking loads. The 2Rx8 organisation supports consistent bandwidth without throttling.

Installation experience

The 288-pin UDIMM form factor drops into the standard desktop DIMM slots on the listed ProDesk models. No heat spreader means the module fits tight SFF chassis without clearance issues. The most common mistake is mixing this stick with existing modules of different speed or rank, which can prevent the system from posting.

Přednosti

  • 8GB capacity expands multitasking headroom for daily workloads
  • 2133MHz DDR4 speed matches HP ProDesk 400 G3, 490 G3 and 600 G2 specifications
  • CL15 latency at 1.2V delivers efficient responsive performance
  • 288-pin UDIMM form factor fits desktop DIMM slots without adapters
  • JEDEC and RoHS compliant for warranty-safe upgrade confidence

Specifikace

BrandOWC
Part Number2U1D42R808GB
Capacity8GB
Type288-Pin DDR4 Non-ECC UDIMM
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemHP ProDesk 400 G3 SFF
HP ProDesk 400 G3 Tower
HP ProDesk 490 G3
HP ProDesk 600 G2 SFF
HP ProDesk 600 G2 Tower

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

How much heat does the 1.2V DDR4 2133MHz module add when running all day?

At 1.2V the stick draws minimal power, so it adds very little heat inside an HP ProDesk 400 G3 or 600 G2 chassis during continuous use.

Does my HP ProDesk 400 G3 Tower already have a free 288-pin DDR4 slot for this 8GB UDIMM?

The module fits any empty 288-pin DDR4 slot in the listed HP ProDesk 400 G3, 490 G3 and 600 G2 systems.

Will this CL15 DDR4 2133MHz stick run stably alongside the original memory in a ProDesk 600 G2 SFF?

Yes — it meets JEDEC DDR4 2133 CL15 specs, so it will down-clock to match existing modules and run without errors.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.