Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Green circuit board with black memory chips, no heat spreader, gold edge connector

OWC

OWC 8GB DDR4 2666MHz CL19 1.2V 288-Pin UDIMM for HP Z2 G4 SFF

SKU CH-HZN6-EW39M

8GB DDR4 2666MHz CL19 1.2V UDIMM validated for HP Z2 G4 SFF workstations

  • Capacity8GB
  • Type288-Pin DDR4 Non-ECC UDIMM
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.2V
  • ECCNo
  • 8GB capacity adds responsive multitasking headroom for HP Z2 G4 SFF
  • 2666MHz DDR4 speed matches system spec for stable operation
  • CL19 latency at 1.2V balances performance with low power draw
  • 288-pin unbuffered non-ECC design fits the workstation slot exactly
  • Backward compatible with 2133MHz and 2400MHz systems for flexible upgrades

HP Z2 G4 SFF DDR4 Upgrade

This 8GB DDR4 module is built specifically for the HP Z2 Workstation G4 SFF. It delivers a straightforward capacity increase for professionals needing smoother multitasking and faster application response in a compact workstation form factor.

DDR4 2666 CL19 Limits

The module runs at 2666MHz with CL19 latency at 1.2V, adhering to JEDEC PC4-21300 specifications. It is backward compatible with 2133MHz and 2400MHz bus speeds, so it will downclock automatically if the system memory controller requires a lower frequency.

Verify Slot Count And Config

Confirm your HP Z2 G4 SFF has an available 288-pin UDIMM slot and supports non-ECC unbuffered memory. The workstation uses a small form factor board, so ensure the single-rank 1Rx8 design matches the supported population rules for your current memory configuration.

Poudarki

  • 8GB capacity adds responsive multitasking headroom for HP Z2 G4 SFF
  • 2666MHz DDR4 speed matches system spec for stable operation
  • CL19 latency at 1.2V balances performance with low power draw
  • 288-pin unbuffered non-ECC design fits the workstation slot exactly
  • Backward compatible with 2133MHz and 2400MHz systems for flexible upgrades

Specifikacije

BrandOWC
Part Number2U6D41R808GB
Capacity8GB
Type288-Pin DDR4 Non-ECC UDIMM
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
Heat SpreaderNo
Compatible SystemHP Z2 Workstation G4 SFF

Druge različice tega modela

še 5 v isti paleti

Ista družina, različen pomnilnik, hladilnik ali takt — primerjajte, preden se odločite.

Vprašanja o tem izdelku

Should I choose the 8GB module or look for a different capacity for my HP Z2 G4 SFF?

This module provides 8GB of DDR4 memory; add one or more sticks to reach the total capacity your workload requires.

What does the 2666MHz rating mean once the RAM is installed in the workstation?

The memory runs at 2666MHz with CL19 latency, and will downclock to 2400MHz or 2133MHz if the system bus requires it.

Is the 288-pin UDIMM interface the only factor that determines compatibility?

The stick is a 288-pin DDR4 UDIMM at 1.2V, non-ECC and unbuffered, matching the HP Z2 G4 SFF memory slot specification.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.