เรารับชำระด้วยคริปโต — เหรียญที่คุณถืออยู่จึงนำมาซื้อฮาร์ดแวร์ของจริงได้จ่ายด้วยคริปโต แล้วนำไปซื้อฮาร์ดแวร์ของจริง จัดส่งฟรีพร้อมประกันภัยทั่วโลก เมื่อสั่งซื้อเกิน US$399 กล่องพัสดุเรียบไม่มีตราสินค้า จัดส่งจากประเทศเยอรมนีจัดส่งฟรีพร้อมประกันภัย เมื่อสั่งซื้อเกิน US$399 อัตราแลกเปลี่ยนของคุณจะถูกล็อกไว้ 30 นาที ทันทีที่เปิดหน้าชำระเงินล็อกอัตราแลกเปลี่ยน 30 นาที สินค้าทุกชิ้นปิดผนึกจากโรงงาน ตรวจสอบหมายเลขซีเรียล และรับประกัน 24 เดือนปิดผนึกจากโรงงาน รับประกัน 24 เดือน

สินค้าที่ติดตาม เข้าสู่ระบบ

OWC

OWC 8GB DDR4 2666MHz CL19 1.2V 288-Pin UDIMM for HP Z2 G4 SFF

SKU CH-HZN6-EW39M

8GB DDR4 2666MHz CL19 1.2V UDIMM validated for HP Z2 G4 SFF workstations

  • Capacity8GB
  • Type288-Pin DDR4 Non-ECC UDIMM
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.2V
  • ECCNo
  • 8GB capacity adds responsive multitasking headroom for HP Z2 G4 SFF
  • 2666MHz DDR4 speed matches system spec for stable operation
  • CL19 latency at 1.2V balances performance with low power draw
  • 288-pin unbuffered non-ECC design fits the workstation slot exactly
  • Backward compatible with 2133MHz and 2400MHz systems for flexible upgrades

HP Z2 G4 SFF DDR4 Upgrade

This 8GB DDR4 module is built specifically for the HP Z2 Workstation G4 SFF. It delivers a straightforward capacity increase for professionals needing smoother multitasking and faster application response in a compact workstation form factor.

DDR4 2666 CL19 Limits

The module runs at 2666MHz with CL19 latency at 1.2V, adhering to JEDEC PC4-21300 specifications. It is backward compatible with 2133MHz and 2400MHz bus speeds, so it will downclock automatically if the system memory controller requires a lower frequency.

Verify Slot Count And Config

Confirm your HP Z2 G4 SFF has an available 288-pin UDIMM slot and supports non-ECC unbuffered memory. The workstation uses a small form factor board, so ensure the single-rank 1Rx8 design matches the supported population rules for your current memory configuration.

จุดเด่น

  • 8GB capacity adds responsive multitasking headroom for HP Z2 G4 SFF
  • 2666MHz DDR4 speed matches system spec for stable operation
  • CL19 latency at 1.2V balances performance with low power draw
  • 288-pin unbuffered non-ECC design fits the workstation slot exactly
  • Backward compatible with 2133MHz and 2400MHz systems for flexible upgrades

ข้อมูลจำเพาะ

BrandOWC
Part Number2U6D41R808GB
Capacity8GB
Type288-Pin DDR4 Non-ECC UDIMM
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
Heat SpreaderNo
Compatible SystemHP Z2 Workstation G4 SFF

รุ่นอื่นในตระกูลเดียวกัน

อีก 5 รุ่นในตระกูลเดียวกัน

ตระกูลเดียวกัน แต่หน่วยความจำ คูลเลอร์ หรือสัญญาณนาฬิกาต่างกัน — เปรียบเทียบก่อนตัดสินใจ

คำถามเกี่ยวกับสินค้านี้

Should I choose the 8GB module or look for a different capacity for my HP Z2 G4 SFF?

This module provides 8GB of DDR4 memory; add one or more sticks to reach the total capacity your workload requires.

What does the 2666MHz rating mean once the RAM is installed in the workstation?

The memory runs at 2666MHz with CL19 latency, and will downclock to 2400MHz or 2133MHz if the system bus requires it.

Is the 288-pin UDIMM interface the only factor that determines compatibility?

The stick is a 288-pin DDR4 UDIMM at 1.2V, non-ECC and unbuffered, matching the HP Z2 G4 SFF memory slot specification.

อื่น ๆ ในหมวดนี้

ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้

หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที