Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Black wall mount bracket with attached computer holder tray, tilt adjustment visible

Peerless

Peerless DS508 Wall Mount with Computer Holder 4.0 x 14.9 x 13.3 Black

SKU CH-KA27-75WBY

Wall mount holds a PC sized 4.0 by 14.9 by 13.3 and tilts 0, 5 or 10 degrees for service access

  • Holds a PC sized 4.0 x 14.9 x 13.3 securely
  • Quick-release bottom lets PC tilt up for easy service
  • Supports tilt angles of 0, 5 and 10 degrees
  • PLP and VESA compatible for wide monitor fit
  • Rated for large screens up to 508 weight capacity

Wall Mount with PC Holder

The Peerless DS508 is a tilt wall mount that integrates a dedicated computer holder. It accepts a PC measuring 4.0 by 14.9 by 13.3 and supports both PLP and VESA mounting patterns for the display. This combination suits installers who want the screen and the computer secured to the same surface.

Tilt Positions and Service Access

The mount offers three fixed tilt angles of 0, 5 and 10 degrees to set the viewing angle. A bottom disengage mechanism lets the screen tilt upward so the held PC can be removed for service without detaching the entire assembly. This arrangement keeps cabling intact during routine maintenance.

PLP and VESA Compatibility

Dual mounting standard support means the bracket fits a wide range of screens without extra adapter plates. The integrated holder eliminates the need for a separate CPU shelf or floor stand, reducing clutter behind the display. The black finish matches typical commercial environments.

Poudarki

  • Holds a PC sized 4.0 x 14.9 x 13.3 securely
  • Quick-release bottom lets PC tilt up for easy service
  • Supports tilt angles of 0, 5 and 10 degrees
  • PLP and VESA compatible for wide monitor fit
  • Rated for large screens up to 508 weight capacity

Specifikacije

Za ta izdelek še ni objavljenih specifikacij.

Vprašanja o tem izdelku

How do I install the Peerless DS508 wall mount and what step is often missed?

Secure the wall plate to studs, attach brackets to the PC, then hook the unit onto the plate and set the tilt to 0, 5 or 10 degrees; the step often missed is confirming the bottom disengagement latch clicks so the PC can be removed for service.

What maintenance or replacement will the DS508 need over time?

The mount has no moving parts that wear out; periodically check that the wall lag bolts and the PC bracket screws remain tight and that the tilt detents at 0, 5 and 10 degrees still engage cleanly.

What limit appears first when the DS508 holds a heavy PC and large screen together under sustained use?

The combined weight of the PC and display must stay within the mount's rated capacity; exceeding that rating is the first limit that can cause sag or hardware failure.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.