Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Black wall mount bracket with attached computer holder tray, tilt adjustment visible

Peerless

Peerless DS508 Wall Mount with Computer Holder 4.0 x 14.9 x 13.3 Black

SKU CH-KA27-75WBY

Wall mount holds a PC sized 4.0 by 14.9 by 13.3 and tilts 0, 5 or 10 degrees for service access

  • Holds a PC sized 4.0 x 14.9 x 13.3 securely
  • Quick-release bottom lets PC tilt up for easy service
  • Supports tilt angles of 0, 5 and 10 degrees
  • PLP and VESA compatible for wide monitor fit
  • Rated for large screens up to 508 weight capacity

Wall Mount with PC Holder

The Peerless DS508 is a tilt wall mount that integrates a dedicated computer holder. It accepts a PC measuring 4.0 by 14.9 by 13.3 and supports both PLP and VESA mounting patterns for the display. This combination suits installers who want the screen and the computer secured to the same surface.

Tilt Positions and Service Access

The mount offers three fixed tilt angles of 0, 5 and 10 degrees to set the viewing angle. A bottom disengage mechanism lets the screen tilt upward so the held PC can be removed for service without detaching the entire assembly. This arrangement keeps cabling intact during routine maintenance.

PLP and VESA Compatibility

Dual mounting standard support means the bracket fits a wide range of screens without extra adapter plates. The integrated holder eliminates the need for a separate CPU shelf or floor stand, reducing clutter behind the display. The black finish matches typical commercial environments.

Prednosti

  • Holds a PC sized 4.0 x 14.9 x 13.3 securely
  • Quick-release bottom lets PC tilt up for easy service
  • Supports tilt angles of 0, 5 and 10 degrees
  • PLP and VESA compatible for wide monitor fit
  • Rated for large screens up to 508 weight capacity

Špecifikácie

Pre tento produkt zatiaľ nie sú zverejnené žiadne špecifikácie.

Otázky k tomuto produktu

How do I install the Peerless DS508 wall mount and what step is often missed?

Secure the wall plate to studs, attach brackets to the PC, then hook the unit onto the plate and set the tilt to 0, 5 or 10 degrees; the step often missed is confirming the bottom disengagement latch clicks so the PC can be removed for service.

What maintenance or replacement will the DS508 need over time?

The mount has no moving parts that wear out; periodically check that the wall lag bolts and the PC bracket screws remain tight and that the tilt detents at 0, 5 and 10 degrees still engage cleanly.

What limit appears first when the DS508 holds a heavy PC and large screen together under sustained use?

The combined weight of the PC and display must stay within the mount's rated capacity; exceeding that rating is the first limit that can cause sag or hardware failure.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.