Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Enclosed CoreXY 3D printer with heated chamber, white metal frame, front door and top vent visible

QIDI TECH

QIDI TECH Q2 3D Printer 65°C Chamber 600mm/s 370°C Hot End

SKU CH-6048-1Q6NJ

An enclosed CoreXY printer with a 65 °C heated chamber, 370 °C hot end and 600 mm/s top speed prints PLA, ABS, PETG and composites in a 270 × 270 × 256 mm volume

  • Parts1 Year
  • Labor1 Year

text Q2

  • Heated 65 °C chamber reduces warping on ABS and PETG
  • CoreXY metal frame with linear guides enables stable 600 mm/s printing
  • Nozzle-leveling sensor delivers accurate first layers on any surface
  • 370 °C hot end supports PLA, ABS, PETG, TPU, PA, PC and composites
  • Triple G3 HEPA carbon filtration cuts odours and particles for home use

First 3D printer with heated chamber

The QIDI TECH Q2 is an enclosed CoreXY 3D printer built for beginners and home users who want reliable prints without constant tuning. A 65 °C actively heated chamber reduces warping on temperature-sensitive filaments, while the nozzle doubles as a leveling sensor to deliver accurate first layers on any build surface.

Check space and material plans

The printer measures 402 × 438 × 494 mm externally and ships in a 480 × 520 × 585 mm box, so verify bench clearance at the back, sides and top before ordering. Decide whether you need the optional QIDI BOX for up to 16-color multi-material printing, because the base unit handles single filament only.

Metal frame and triple filtration

A full-metal CoreXY frame with precision linear guides and a 1.5 GT belt keeps motion stable at speeds up to 600 mm/s, while the 370 °C hot end supports PLA, ABS, PETG, TPU, PA, PC and carbon-fibre composites. Triple filtration — G3 pre-filter, H12 HEPA and activated carbon — runs inside the flame-retardant chamber, and an AI camera monitors prints for remote supervision.

Poudarki

  • Heated 65 °C chamber reduces warping on ABS and PETG
  • CoreXY metal frame with linear guides enables stable 600 mm/s printing
  • Nozzle-leveling sensor delivers accurate first layers on any surface
  • 370 °C hot end supports PLA, ABS, PETG, TPU, PA, PC and composites
  • Triple G3 HEPA carbon filtration cuts odours and particles for home use

Specifikacije

Parts1 Year
Labor1 Year

Druge različice tega modela

še 1 v isti paleti

Ista družina, različen pomnilnik, hladilnik ali takt — primerjajte, preden se odločite.

Vprašanja o tem izdelku

Does the Q2 come with everything needed to start printing or must I buy filament and the QIDI BOX separately?

The printer includes the CoreXY machine with 65 °C heated chamber, 370 °C hot end, auto-leveling nozzle sensor, AI camera, triple filtration and power-loss recovery. Filament and the optional QIDI BOX for 16-colour multi-material printing are sold separately.

Which configuration should I choose if I want to print engineering materials such as PA, PC or carbon-fibre composites?

The single Q2 model already reaches 370 °C nozzle temperature and maintains a 65 °C chamber, so it handles PLA, ABS, PETG, TPU, PA, PC and carbon/glass-fibre composites without any hardware upgrade.

What does the 600 mm/s headline speed mean for everyday prints on the 270×270×256 mm build volume?

The CoreXY frame and 1.5 GT belt allow travel moves up to 600 mm/s; actual print speeds will be lower depending on material, layer height and geometry, but the rigid frame and heated chamber keep quality consistent across the full build volume.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.