暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Enclosed CoreXY 3D printer with heated chamber, white metal frame, front door and top vent visible

QIDI TECH

QIDI TECH Q2 3D Printer 65°C Chamber 600mm/s 370°C Hot End

SKU CH-6048-1Q6NJ

An enclosed CoreXY printer with a 65 °C heated chamber, 370 °C hot end and 600 mm/s top speed prints PLA, ABS, PETG and composites in a 270 × 270 × 256 mm volume

  • Parts1 Year
  • Labor1 Year

text Q2

  • Heated 65 °C chamber reduces warping on ABS and PETG
  • CoreXY metal frame with linear guides enables stable 600 mm/s printing
  • Nozzle-leveling sensor delivers accurate first layers on any surface
  • 370 °C hot end supports PLA, ABS, PETG, TPU, PA, PC and composites
  • Triple G3 HEPA carbon filtration cuts odours and particles for home use

First 3D printer with heated chamber

The QIDI TECH Q2 is an enclosed CoreXY 3D printer built for beginners and home users who want reliable prints without constant tuning. A 65 °C actively heated chamber reduces warping on temperature-sensitive filaments, while the nozzle doubles as a leveling sensor to deliver accurate first layers on any build surface.

Check space and material plans

The printer measures 402 × 438 × 494 mm externally and ships in a 480 × 520 × 585 mm box, so verify bench clearance at the back, sides and top before ordering. Decide whether you need the optional QIDI BOX for up to 16-color multi-material printing, because the base unit handles single filament only.

Metal frame and triple filtration

A full-metal CoreXY frame with precision linear guides and a 1.5 GT belt keeps motion stable at speeds up to 600 mm/s, while the 370 °C hot end supports PLA, ABS, PETG, TPU, PA, PC and carbon-fibre composites. Triple filtration — G3 pre-filter, H12 HEPA and activated carbon — runs inside the flame-retardant chamber, and an AI camera monitors prints for remote supervision.

特長

  • Heated 65 °C chamber reduces warping on ABS and PETG
  • CoreXY metal frame with linear guides enables stable 600 mm/s printing
  • Nozzle-leveling sensor delivers accurate first layers on any surface
  • 370 °C hot end supports PLA, ABS, PETG, TPU, PA, PC and composites
  • Triple G3 HEPA carbon filtration cuts odours and particles for home use

仕様

Parts1 Year
Labor1 Year

このモデルの他のバージョン

同シリーズにさらに 1点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Does the Q2 come with everything needed to start printing or must I buy filament and the QIDI BOX separately?

The printer includes the CoreXY machine with 65 °C heated chamber, 370 °C hot end, auto-leveling nozzle sensor, AI camera, triple filtration and power-loss recovery. Filament and the optional QIDI BOX for 16-colour multi-material printing are sold separately.

Which configuration should I choose if I want to print engineering materials such as PA, PC or carbon-fibre composites?

The single Q2 model already reaches 370 °C nozzle temperature and maintains a 65 °C chamber, so it handles PLA, ABS, PETG, TPU, PA, PC and carbon/glass-fibre composites without any hardware upgrade.

What does the 600 mm/s headline speed mean for everyday prints on the 270×270×256 mm build volume?

The CoreXY frame and 1.5 GT belt allow travel moves up to 600 mm/s; actual print speeds will be lower depending on material, layer height and geometry, but the rigid frame and heated chamber keep quality consistent across the full build volume.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。