NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.
Replace Power
A 420W ATX power supply compatible with HP Media Center models, providing SATA and multiple peripheral connectors with switchable 110V or 220V input
This 420W ATX power supply replaces the original unit in HP Media Center models a1206n, m7077c, m7360n, a1430n, m8050br and m1082n. It fits standard ATX mounting points and uses a switchable 110V/220V input for worldwide mains compatibility. The grey enclosure houses a single cooling fan. It is built for owners of those specific HP desktops who need a direct swap.
The unit provides a 15-inch SATA connector, a 14-inch 20+4 pin ATX motherboard plug, a 14-inch 12V ATX plug, two 15-inch large peripheral connectors, two 6-inch large peripheral connectors and one 6-inch small peripheral connector. Cable lengths range from 6 to 15 inches to reach drives and motherboard headers in typical mid-tower chassis. A single 80mm fan handles airflow. Builders working in very compact cases should verify clearances before ordering.
The 420W maximum output is the single figure that determines whether this unit can support your installed components. Add the rated draw of your CPU, graphics card, drives and expansion cards; if the total approaches or exceeds 420W, a higher-capacity supply is required. No other specification in the data overrides this limit.
| Brand | Replace Power |
|---|---|
| Model | RPSU-C99-25 |
| Color | Grey |
| Type | ATX |
| Fans | 1 |
| Weight | 0.1 |
It supplies a 14-inch 20+4 pin ATX connector and a 14-inch 12V ATX connector for motherboard power.
The unit fits a standard ATX bay; the single 80mm fan exhausts at the rear and the grey casing matches typical mounting points.
Slide the 110V/220V switch to match your mains voltage, then secure the unit with four screws and attach the 20+4 pin, 12V, SATA and peripheral cables.
Tudi v tem oddelku
Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.
V čem plačujete in v čem berete cene.
Poslano iz Vaše denarnice ob blagajni
Samo za prikaz — katalog je cenovno izražen v dolarjih
Nobena valuta ne ustreza.
Izberite jezik, v katerem Vam govori spletna stran.
Prvič tu?
Že imate račun?
Samodejne ponastavitve ni: ta trgovina ne pošilja e-pošte, zato ni enkratne povezave, ki bi jo lahko zahtevali. Pustite naslov na računu — nekdo ga bo obravnaval ročno.
Zahteva zabeležena
V Vašo elektronsko pošto ne prihaja nič — ta trgovina ne pošilja nobene e-pošte. Zahteve nekdo obravnava ročno.
Ste se spomnili?