Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Rectangular E1.S 9.5mm enterprise SSD with gold edge connector and label

Solidigm

Solidigm D7-P5520 SSDPFUKX019T11Z 1.92TB E1.S 9.5mm enterprise SSD

SKU CH-9K5S-JQ8FC MPN SSDPFUKX019T11Z

A 1.92TB E1.S 9.5mm enterprise SSD using 3D TLC and a PCI-Express 4.0 x4 interface

  • Form FactorE1.S 9.5mm
  • Capacity1.92TB
  • Memory Components3D TLC
  • InterfacePCI-Express 4.0 x4

Option 1.92TB E1.S 9.5mm

Prikaži še 7 konfiguracij
  • E1.S 9.5mm form factor fits dense server bays
  • 92TB capacity stores large enterprise datasets
  • PCI-Express 4.0 x4 interface delivers high throughput
  • 3D TLC memory balances endurance with cost efficiency
  • D7-P5520 series built for read-intensive workloads

1.92TB E1.S enterprise SSD

The Solidigm D7-P5520 SSDPFUKX019T11Z delivers 1.92TB of 3D TLC storage in a 9.5mm E1.S form factor. It connects through a PCI-Express 4.0 x4 interface for server and storage-array workloads. The drive is sold new and targets IT teams that need high-density flash in a compact enterprise slot.

Installation notes

The E1.S 9.5mm module slides into a compatible hot-plug cage and locks with the standard latch. No cables are required, but the chassis must provide the correct keying and PCIe lane allocation. A common issue is inserting the drive into a slot wired for a different form factor or generation, which prevents the link from training.

Pre-order checklist

Verify that your server or enclosure lists E1.S 9.5mm support and maps PCI-Express 4.0 x4 lanes to the intended bay. Confirm the backplane supplies the required power envelope for a 3D TLC enterprise drive. Ensure the system firmware recognises the D7-P5520 series before deployment.

Poudarki

  • E1.S 9.5mm form factor fits dense server bays
  • 92TB capacity stores large enterprise datasets
  • PCI-Express 4.0 x4 interface delivers high throughput
  • 3D TLC memory balances endurance with cost efficiency
  • D7-P5520 series built for read-intensive workloads

Specifikacije

BrandSolidigm
SeriesD7-P5520
ModelSSDPFUKX019T11Z
Form FactorE1.S 9.5mm
Capacity1.92TB
Memory Components3D TLC
InterfacePCI-Express 4.0 x4
Teža pošiljke0.91 kg
Velikost pošiljke203 × 152 × 76 mm

Druge različice tega modela

še 5 v isti paleti

Ista družina, različen pomnilnik, hladilnik ali takt — primerjajte, preden se odločite.

Vprašanja o tem izdelku

How can I confirm the D7-P5520 SSDPFUKX019T11Z is operating correctly after installation?

Verify the drive appears in the system BIOS or OS disk utility at its full 1.92TB capacity and that the link speed shows PCI-Express 4.0 x4.

What comes with the SSDPFUKX019T11Z and what must I source separately?

The package contains the 1.92TB E1.S 9.5mm drive only; a compatible E1.S backplane or carrier, mounting screws and any required cabling are not included.

Which capacity in the D7-P5520 E1.S 9.5mm line should I choose for a 1.92TB requirement?

Select this SSDPFUKX019T11Z model; it is the specific 1.92TB variant in the D7-P5520 series with 3D TLC memory and PCI-Express 4.0 x4 interface.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.