Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava

STARTECH

STARTECH ST2000PEXPSE Dual Port Gigabit Ethernet PoE Network Card

SKU CH-ENMM-9XTTN MPN ST2000PEXPSE

Adds two Gigabit Ethernet ports with 25.5 W PoE per port via PCI Express

  • Speed10/100/1000Mbps
  • InterfacePCI-Express
  • FeaturesProduct Type:Gigabit Ethernet Card
  • Weight20
  • Package ContentsDual Port PCI Express Gigabit Ethernet PCIe Network Card Ada

Option PCIe 1 Gbps PoE - 2 Port RJ45

Prečrtane različice obstajajo, vendar tukaj niso na voljo.

  • Power two devices per port with up to 25.5W PoE+ support
  • Dual Gigabit RJ45 ports deliver 10/100/1000Mbps wired throughput
  • PCI Express interface adds networking without USB bandwidth limits
  • 48 KB on-chip buffers reduce packet loss under heavy load
  • Surge protection design guards the system against lightning-induced damage

Dual Gigabit PoE Ports

The StarTech ST2000PEXPSE adds two 10/100/1000 Mbps Power-over-Ethernet RJ45 ports to a PCI Express slot. Each port delivers data and up to 25.5 W of power, compliant with the IEEE 802.3at Type 1 and Type 2 standard. It targets installers who need to supply PoE devices such as access points or cameras directly from a desktop or server chassis.

Replacing External Injectors

This card removes the need for separate midspan injectors or a dedicated PoE switch when only a few endpoints are required. The upgrade is worthwhile when cabling runs are already terminated at the host location and local power sourcing simplifies the deployment. On-chip 48 KB transmit and receive buffers help maintain throughput under load.

Build Integration

A free PCI Express slot, a low-profile bracket option and either a SATA or LP4 Molex power connector from the PSU are required. The adapter draws PoE budget from that internal connector, freeing external wall outlets and reducing cable clutter. Surge protection circuitry helps shield the host system from lightning-induced transients on the Ethernet lines.

Poudarki

  • Power two devices per port with up to 25.5W PoE+ support
  • Dual Gigabit RJ45 ports deliver 10/100/1000Mbps wired throughput
  • PCI Express interface adds networking without USB bandwidth limits
  • 48 KB on-chip buffers reduce packet loss under heavy load
  • Surge protection design guards the system against lightning-induced damage

Specifikacije

BrandStarTech.com
ModelST2000PEXPSE
Speed10/100/1000Mbps
InterfacePCI-Express
FeaturesProduct Type:Gigabit Ethernet Card
Weight20
Package ContentsDual Port PCI Express Gigabit Ethernet PCIe Network Card Adapter - PoE/PSE
1 x Low-Profile Bracket
1 x Driver CD
1 x Instruction Manual
Teža pošiljke0.25 kg
Velikost pošiljke229 × 163 × 43 mm

Druge različice tega modela

še 5 v isti paleti

Ista družina, različen pomnilnik, hladilnik ali takt — primerjajte, preden se odločite.

Vprašanja o tem izdelku

What PCI-Express slot and case bracket does the ST2000PEXPSE require?

The card fits a PCI-Express slot and ships with a low-profile bracket for slim chassis installations.

How is the PoE power connected to the card, and what step is often missed?

Connect internal SATA or LP4 Molex power to the onboard connector; the card cannot supply up to 25.5W per port without this auxiliary feed.

Which on-board components protect the system from surges, and do they need replacement?

The built-in surge protection is a permanent circuit design; no user-serviceable parts require periodic replacement.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.