Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Black standalone SATA duplicator with LCD screen and three hot-swap drive slots

Systor

Systor 1:3 SATA Duplicator & Sanitizer SYS603DP 600MB/s

SKU CH-3WRZ-27CXK

Standalone SATA duplicator copies or sanitises one source to three targets at 600 MB/s with DoD 5220.22-M erase

  • TypeHard Drive Duplicator
  • Target1 to 3
  • Buffer Memory128 MB
  • Data Transfer Rate36.0GB/min (600MB/sec)
  • DisplayLCD Screen
  • Operating TypeStandalone

TARGET SIZE 1 to 03

DATA TRANSFER RATE 36.0GB/min [600MB/sec]

  • Copies three drives at once with 1 to 3 target ports
  • 600 MB/s transfer rate moves 36 GB per minute
  • Standalone operation needs no computer or software
  • DoD 5220.22-M compliant erase removes all data traces
  • Accepts 2.5" and 3.5" SATA drives without adapters

What it is and who it's for

The Systor SYS603DP is a standalone SATA duplicator and sanitizer that copies one source drive to three targets at once. It accepts 2.5 and 3.5 inch HDDs or SSDs directly without adapters and runs without a host computer. IT teams and data centres use it for rapid deployment or secure disposal of SATA storage.

Sustained-load behaviour

A 128 MB buffer supports a continuous 36.0 GB per minute transfer rate, rated at 600 MB per second across all three ports. Dual-port hot-swap bays with individual 40 mm rear fans and an additional outtake fan per bay keep temperatures stable during extended multi-drive sessions. The 250 W power supply operates on 115 or 230 V at 50 or 60 Hz for long-duration tasks.

What to check before ordering

Verify that every drive you plan to duplicate or erase uses a SATA interface; other interfaces are not supported. Confirm the unit's slot-load bays physically accommodate your 2.5 or 3.5 inch devices. Ensure you have access to 115 V or 230 V mains power matching the 250 W supply. The LCD menu offers Systems-and-Files or Whole-Media copy modes plus DoD 5220.22-M compliant sanitisation.

Poudarki

  • Copies three drives at once with 1 to 3 target ports
  • 600 MB/s transfer rate moves 36 GB per minute
  • Standalone operation needs no computer or software
  • DoD 5220.22-M compliant erase removes all data traces
  • Accepts 2.5" and 3.5" SATA drives without adapters

Specifikacije

BrandSystor
TypeHard Drive Duplicator
Target1 to 3
Buffer Memory128 MB
Data Transfer Rate36.0GB/min (600MB/sec)
DisplayLCD Screen
Operating TypeStandalone
ConnectorSATA
Panel ColorBlack
Load TypeSlot
FeaturesMULTIPLE COPY FUNCTIONS
System and Files:
Copies only the system and files area of the source HDD, saving overall copy time
Whole Media:
Copies the entire content on the source HDD device, including both the data and empty spaces
Copy + Compare:
Ensures an accurate duplication between the source HDD and target HDD(s)
MULTIPLE ERASE FUNCTIONS
Quick Erase:
Only erases the table of content/index of the target HDD's file system
Full Erase:
Erases the entire content and whole sectors of the target HDD
DoD Erase:
Compliant with U.S.A. Department of Defense standard, this option fully erase
Power Supply115/230 V, 50/60 Hz, 250 W
Package Contentssee pictures for details

Druge različice tega modela

še 5 v isti paleti

Ista družina, različen pomnilnik, hladilnik ali takt — primerjajte, preden se odločite.

Vprašanja o tem izdelku

How much heat and noise does the duplicator generate when running all day with its 40 mm rear fans and per-bay outtake fans?

The unit uses a 40 mm rear fan and a dedicated outtake fan on each drive bay to maintain airflow during extended operation. A 250 W power supply supports continuous use.

What drives must I already own to use the duplicator, since it operates standalone without a computer?

You need one source SATA drive and up to three target SATA drives, either 2.5" or 3.5" SSDs or HDDs. No adapters are required for either form factor.

Will the duplicator work with older SATA drives I still have, and does it copy their boot sectors?

Yes, it copies sector by sector regardless of brand, operating system or format, and can include partition and boot sector information in the duplicate.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.