Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Black standalone SATA duplicator with 15 drive slots and LCD screen

Systor

Systor SYS615DP 1:15 SATA Duplicator & Sanitizer

SKU CH-HTSX-QTJ6Y

Copies and sanitises up to 15 SATA drives simultaneously at 36 GB/min with DoD 5220.22-M compliance

  • TypeHard Drive Duplicator
  • Target1 to 15
  • Buffer Memory128 MB
  • Data Transfer Rate36.0GB/min (600MB/sec)
  • DisplayLCD Screen
  • Operating TypeStandalone

TARGET SIZE 1 to 15

DATA TRANSFER RATE 36.0GB/min [600MB/sec]

  • Copies up to 15 drives simultaneously from one source
  • 36 GB per minute transfer rate speeds large jobs
  • DoD 5220.22-M compliant sanitisation removes data securely
  • Standalone operation needs no PC or software installed
  • Dual hot-swap bays accept 2.5" and 3.5" SATA drives

Standalone SATA Duplicator for High-Volume Cloning

The Systor SYS615DP is a standalone hard-drive duplicator and sanitiser that copies one source SATA drive to fifteen targets simultaneously. It operates without a host computer and supports both 2.5 and 3.5 form-factor SSDs and HDDs without adapters. A 128 MB buffer and 36.0 GB per minute transfer rate sustain high-throughput workflows. The unit includes a 600 W power supply and 40 mm cooling fans for continuous operation.

Suited for IT Departments and Data-Centres

This duplicator fits teams that need rapid, simultaneous cloning or secure erasure of SATA media in a standalone appliance. It handles both system-and-files and whole-media copy modes and meets DoD 5220.22-M sanitation requirements. Organisations that require duplication of interfaces other than SATA, or that need network-attached or software-controlled operation, should consider a different platform.

1-to-15 Target Port Count Determines Throughput

The defining specification is the fifteen target ports, which sets the maximum number of drives cloned in a single cycle. This port count directly dictates batch size and overall duplication speed for the device.

Poudarki

  • Copies up to 15 drives simultaneously from one source
  • 36 GB per minute transfer rate speeds large jobs
  • DoD 5220.22-M compliant sanitisation removes data securely
  • Standalone operation needs no PC or software installed
  • Dual hot-swap bays accept 2.5" and 3.5" SATA drives

Specifikacije

BrandSystor
TypeHard Drive Duplicator
Target1 to 15
Buffer Memory128 MB
Data Transfer Rate36.0GB/min (600MB/sec)
DisplayLCD Screen
Operating TypeStandalone
ConnectorSATA
Panel ColorBlack
Load TypeSlot
FeaturesMULTIPLE COPY FUNCTIONS
System and Files:
Copies only the system and files area of the source HDD, saving overall copy time
Whole Media:
Copies the entire content on the source HDD device, including both the data and empty spaces
Copy + Compare:
Ensures an accurate duplication between the source HDD and target HDD(s)
MULTIPLE ERASE FUNCTIONS
Quick Erase:
Only erases the table of content/index of the target HDD's file system
Full Erase:
Erases the entire content and whole sectors of the target HDD
DoD Erase:
Compliant with U.S.A. Department of Defense standard, this option fully erase
Power Supply115/230 V, 50/60 Hz, 600 W (300w x2)
Package Contentssee pictures for details

Druge različice tega modela

še 5 v isti paleti

Ista družina, različen pomnilnik, hladilnik ali takt — primerjajte, preden se odločite.

Vprašanja o tem izdelku

What type of drives must I already have to use the 15 target bays on this duplicator?

The unit accepts 2.5-inch and 3.5-inch SATA hard drives or solid-state drives directly, with no adapters required for either form factor.

Will my existing SATA drives work at the duplicator's stated 600MB/sec transfer rate?

The duplicator can reach up to 600MB/sec; actual speed depends on the sustained write performance of the source and target drives you install.

How can I verify that a DoD 5220.22-M erase cycle finished correctly on the LCD screen?

The LCD display shows the erase method and completion status for each bay, confirming when the multi-pass sanitation process has ended.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.