نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Black standalone SATA duplicator with 15 drive slots and LCD screen

Systor

Systor SYS615DP 1:15 SATA Duplicator & Sanitizer

SKU CH-HTSX-QTJ6Y

Copies and sanitises up to 15 SATA drives simultaneously at 36 GB/min with DoD 5220.22-M compliance

  • TypeHard Drive Duplicator
  • Target1 to 15
  • Buffer Memory128 MB
  • Data Transfer Rate36.0GB/min (600MB/sec)
  • DisplayLCD Screen
  • Operating TypeStandalone

TARGET SIZE 1 to 15

DATA TRANSFER RATE 36.0GB/min [600MB/sec]

  • Copies up to 15 drives simultaneously from one source
  • 36 GB per minute transfer rate speeds large jobs
  • DoD 5220.22-M compliant sanitisation removes data securely
  • Standalone operation needs no PC or software installed
  • Dual hot-swap bays accept 2.5" and 3.5" SATA drives

Standalone SATA Duplicator for High-Volume Cloning

The Systor SYS615DP is a standalone hard-drive duplicator and sanitiser that copies one source SATA drive to fifteen targets simultaneously. It operates without a host computer and supports both 2.5 and 3.5 form-factor SSDs and HDDs without adapters. A 128 MB buffer and 36.0 GB per minute transfer rate sustain high-throughput workflows. The unit includes a 600 W power supply and 40 mm cooling fans for continuous operation.

Suited for IT Departments and Data-Centres

This duplicator fits teams that need rapid, simultaneous cloning or secure erasure of SATA media in a standalone appliance. It handles both system-and-files and whole-media copy modes and meets DoD 5220.22-M sanitation requirements. Organisations that require duplication of interfaces other than SATA, or that need network-attached or software-controlled operation, should consider a different platform.

1-to-15 Target Port Count Determines Throughput

The defining specification is the fifteen target ports, which sets the maximum number of drives cloned in a single cycle. This port count directly dictates batch size and overall duplication speed for the device.

أبرز المميزات

  • Copies up to 15 drives simultaneously from one source
  • 36 GB per minute transfer rate speeds large jobs
  • DoD 5220.22-M compliant sanitisation removes data securely
  • Standalone operation needs no PC or software installed
  • Dual hot-swap bays accept 2.5" and 3.5" SATA drives

المواصفات

BrandSystor
TypeHard Drive Duplicator
Target1 to 15
Buffer Memory128 MB
Data Transfer Rate36.0GB/min (600MB/sec)
DisplayLCD Screen
Operating TypeStandalone
ConnectorSATA
Panel ColorBlack
Load TypeSlot
FeaturesMULTIPLE COPY FUNCTIONS
System and Files:
Copies only the system and files area of the source HDD, saving overall copy time
Whole Media:
Copies the entire content on the source HDD device, including both the data and empty spaces
Copy + Compare:
Ensures an accurate duplication between the source HDD and target HDD(s)
MULTIPLE ERASE FUNCTIONS
Quick Erase:
Only erases the table of content/index of the target HDD's file system
Full Erase:
Erases the entire content and whole sectors of the target HDD
DoD Erase:
Compliant with U.S.A. Department of Defense standard, this option fully erase
Power Supply115/230 V, 50/60 Hz, 600 W (300w x2)
Package Contentssee pictures for details

إصدارات أخرى من هذا الطراز

5 أخرى من الفئة نفسها

نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.

أسئلة حول هذا المنتج

What type of drives must I already have to use the 15 target bays on this duplicator?

The unit accepts 2.5-inch and 3.5-inch SATA hard drives or solid-state drives directly, with no adapters required for either form factor.

Will my existing SATA drives work at the duplicator's stated 600MB/sec transfer rate?

The duplicator can reach up to 600MB/sec; actual speed depends on the sustained write performance of the source and target drives you install.

How can I verify that a DoD 5220.22-M erase cycle finished correctly on the LCD screen?

The LCD display shows the erase method and completion status for each bay, confirming when the multi-pass sanitation process has ended.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.