نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Black standalone SATA duplicator with 24 hot-swap slots and LCD screen

Systor

Systor SYS3024DP 1-to-24 SATA Duplicator 300MB/s 128MB Buffer 800W

SKU CH-9S7N-MKMK9

Standalone duplicator clones one SATA drive to 24 targets at 300 MB/s with 128 MB buffer and DoD 5220.22-M erase

  • TypeHard Drive Duplicator
  • Target1 to 24
  • Buffer Memory128 MB
  • Data Transfer Rate18.0GB/min (300MB/sec)
  • DisplayLCD Screen
  • Operating TypeStandalone

TARGET SIZE 1 to 24

DATA TRANSFER RATE 18.0GB/min [300MB/sec]

  • Copies 24 drives at once from one source
  • 300 MB/s transfer speed with 128 MB buffer
  • Sector-by-sector cloning independent of OS or format
  • Multiple sanitise modes including DoD 5220.22-M compliant erase
  • Dual 400 W supplies and per-bay cooling fans

Standalone SATA duplicator with 24 target bays

The Systor SYS3024DP is a standalone hard-drive duplicator that copies one SATA source drive to up to 24 SATA targets at once. It operates without a host computer and uses a 128 MB buffer to sustain a transfer rate of 300 MB/s across both 2.5 inch and 3.5 inch drives. An LCD screen reports progress and lets the operator select copy or erase modes.

Suited for high-volume SATA duplication.

This unit suits IT departments, data-recovery labs and OEM builders who need to clone many SATA hard drives or solid-state drives in a single session. It also provides multiple sanitisation methods including a DoD 5220.22-M compliant erase. Buyers who need to duplicate drives with interfaces other than SATA, or who only need occasional single-drive copies, should consider a different device.

24-target capacity with 300 MB/s throughput

The defining specification is the ability to write to 24 target bays simultaneously while maintaining 300 MB/s per port. Dual 400 W power supplies (800 W total) and per-bay cooling fans support sustained operation across all slots. If the workload requires fewer concurrent targets or a lower sustained throughput, a smaller duplicator may be more appropriate.

أبرز المميزات

  • Copies 24 drives at once from one source
  • 300 MB/s transfer speed with 128 MB buffer
  • Sector-by-sector cloning independent of OS or format
  • Multiple sanitise modes including DoD 5220.22-M compliant erase
  • Dual 400 W supplies and per-bay cooling fans

المواصفات

BrandSystor
ModelSYS3024DP
TypeHard Drive Duplicator
Target1 to 24
Buffer Memory128 MB
Data Transfer Rate18.0GB/min (300MB/sec)
DisplayLCD Screen
Operating TypeStandalone
ConnectorSATA
Panel ColorBlack
Load TypeSlot
FeaturesMULTIPLE COPY FUNCTIONS
System and Files:
Copies only the system and files area of the source HDD, saving overall copy time
Whole Media:
Copies the entire content on the source HDD device, including both the data and empty spaces
Copy + Compare:
Ensures an accurate duplication between the source HDD and target HDD(s)
MULTIPLE ERASE FUNCTIONS
Quick Erase:
Only erases the table of content/index of the target HDD's file system
Full Erase:
Erases the entire content and whole sectors of the target HDD
DoD Erase:
Compliant with U.S.A. Department of Defense standard, this option fully erase
Power Supply115/230 V, 50/60 Hz, 800 W (400w x2)
Package Contentssee pictures for details

إصدارات أخرى من هذا الطراز

5 أخرى من الفئة نفسها

نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.

أسئلة حول هذا المنتج

Do I need to supply my own 2.5 inch and 3.5 inch SATA hard drives or SSDs to use as source and targets on this duplicator?

Yes, the duplicator provides 24 SATA target bays and one source bay; you must provide the SATA hard drives or solid-state drives you want to copy or erase.

Will the duplicator copy data from a 2.5 inch SATA SSD to a 3.5 inch SATA HDD in the same operation?

Yes, it supports both 2.5 inch and 3.5 inch SATA drives simultaneously, copying sector by sector regardless of drive size or format.

How can I verify that a DoD 5220.22-M erase has completed successfully on this unit?

The LCD screen displays the erase progress and confirms completion once the multiple-pass DoD 5220.22-M sanitation cycle finishes.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.