نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Black standalone SATA duplicator unit with 20 vertical drive slots and LCD display

Systor

Systor 1:20 SATA Duplicator & Sanitizer 18GB/min 300MB/s 128MB Buffer (SYS3020DP)

SKU CH-XZAW-AWT4Q

Standalone SATA duplicator copies or sanitises up to 20 drives at 300 MB/s with 128 MB buffer and DoD 5220.22-M compliance

  • TypeHard Drive Duplicator
  • Target1 to 20
  • Buffer Memory128 MB
  • Data Transfer Rate18.0GB/min (300MB/sec)
  • DisplayLCD Screen
  • Operating TypeStandalone

TARGET SIZE 1 to 20

DATA TRANSFER RATE 18.0GB/min [300MB/sec]

  • Duplicates up to 20 drives simultaneously with 1:20 target ratio
  • Copies at 18GB per minute reaching 300MB per second transfer speed
  • 128MB buffer memory maintains steady data flow during large operations
  • Standalone LCD operation requires no host computer or software installation
  • DoD 5220.22-M compliant sanitisation erases data to government-grade standards

Standalone 1:20 SATA Duplicator

This Systor unit copies one source drive to up to 20 targets without a host computer. It handles both 2.5 and 3.5 inch SATA SSDs and HDDs directly in its slot-loading bays. An integrated LCD screen reports progress and status during each operation. The device runs from an internal 800 W supply that accepts 115 or 230 V at 50 or 60 Hz.

300 MB/s transfer with 128 MB buffer

Data moves at up to 300 MB per second, equivalent to 18 GB per minute, buffered by 128 MB of onboard memory. Two copy modes are available: Systems and Files copies only the used space to save time, while Whole Media duplicates every sector including empty areas. Both modes work regardless of the source drive’s operating system or file system.

Hot-swap bays with DoD-sanitise erase

Dual-port hot-swap slots let you swap target drives without powering down the chassis. Built-in erase functions include a multi-pass routine compliant with DoD 5220.22-M for secure data sanitation. Rear 40 mm fans and per-bay exhaust fans keep temperatures stable during long batch runs. No extra adapters, software licences or host cables are required.

أبرز المميزات

  • Duplicates up to 20 drives simultaneously with 1:20 target ratio
  • Copies at 18GB per minute reaching 300MB per second transfer speed
  • 128MB buffer memory maintains steady data flow during large operations
  • Standalone LCD operation requires no host computer or software installation
  • DoD 5220.22-M compliant sanitisation erases data to government-grade standards

المواصفات

BrandSystor
TypeHard Drive Duplicator
Target1 to 20
Buffer Memory128 MB
Data Transfer Rate18.0GB/min (300MB/sec)
DisplayLCD Screen
Operating TypeStandalone
ConnectorSATA
Panel ColorBlack
Load TypeSlot
FeaturesMULTIPLE COPY FUNCTIONS
System and Files:
Copies only the system and files area of the source HDD, saving overall copy time
Whole Media:
Copies the entire content on the source HDD device, including both the data and empty spaces
Copy + Compare:
Ensures an accurate duplication between the source HDD and target HDD(s)
MULTIPLE ERASE FUNCTIONS
Quick Erase:
Only erases the table of content/index of the target HDD's file system
Full Erase:
Erases the entire content and whole sectors of the target HDD
DoD Erase:
Compliant with U.S.A. Department of Defense standard, this option fully erase
Power Supply115/230 V, 50/60 Hz, 800 W (400w x2)
Package Contentssee pictures for details

إصدارات أخرى من هذا الطراز

5 أخرى من الفئة نفسها

نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.

أسئلة حول هذا المنتج

What does the 300 MB/s transfer rate mean when I am copying twenty drives at once?

The duplicator sustains up to 300 MB/s per port, so each of the twenty target drives can receive data at that speed simultaneously without sharing bandwidth.

Which SATA standard does the duplicator use, and does it limit the speed of modern SSDs?

The unit uses SATA connectors; the practical ceiling is the stated 300 MB/s, so faster SATA SSDs will be limited to that throughput.

Will both 2.5-inch and 3.5-inch drives fit the slots without extra brackets?

Yes, the bays accept 2.5-inch and 3.5-inch SATA drives directly with no adapters required.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.