Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Light brown thermal pad 120x20x2.0mm

Thermal Grizzly

Thermal Grizzly Minus Pad 8 120x20x2.0mm TG-MP8-1202020-1R thermal paste

SKU CH-R1AM-7XJ09 MPN TG-MP8-1202020-1R

A 120x20mm thermal pad with 8.0 W/mK conductivity and 2.0mm thickness for efficient heat transfer between components and heatsinks

  • 0 W/mK conductivity moves heat fast from chip to cooler
  • 120 mm by 20 mm sheet covers large VRM or GPU areas
  • 0 mm thickness bridges uneven gaps without extra pressure
  • Operates from -100 °C to 250 °C for extreme cooling setups

Thermal Pad 8.0 W/mK Conductivity

The Thermal Grizzly Minus Pad 8 delivers 8.0 W/mK thermal conductivity in a light brown pad measuring 120 by 20 millimetres with a 2.0 millimetre thickness. It suits builders who need a pre-cut interface for memory modules or voltage regulators. Buyers requiring larger sheets or custom shapes will need a different format.

Operating Range -100°C to +250°C

The pad remains stable across a continuous operating window from minus 100 degrees Celsius to plus 250 degrees Celsius. Its compliant structure fills microscopic gaps without pump-out or dry-out, keeping thermal resistance low and fan noise unchanged. No curing time or re-application is required during normal use.

Poudarki

  • 0 W/mK conductivity moves heat fast from chip to cooler
  • 120 mm by 20 mm sheet covers large VRM or GPU areas
  • 0 mm thickness bridges uneven gaps without extra pressure
  • Operates from -100 °C to 250 °C for extreme cooling setups

Specifikacije

Za ta izdelek še ni objavljenih specifikacij.

Vprašanja o tem izdelku

How do I install the 120x20x2.0mm Minus Pad 8, and what step do people often get wrong?

Cut the pad to size, peel both protective films, and place it on the component without stretching; the common mistake is leaving one film on, which blocks heat transfer.

Will the Minus Pad 8 with 8.0 W/mK conductivity need replacement, and how can I tell?

It does not dry out like paste, but inspect it during upgrades; replace if the light-brown material shows permanent compression, cracking, or reduced thickness from the original 2.0 mm.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.