Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Green PCB card with silver PCIe x1 edge connector and two black 19-pin USB 3.0 headers, includes standard and low-profile brackets

Yitter

Yitter PCIe x1 to 2×19-pin USB 3.0 Header Card

SKU CH-W08K-V1QZA

Adds two internal 19-pin USB 3.0 headers via a PCIe x1 slot using a NEC UPD720201 chipset

  • TypePCI Express to ExpressCard
  • External USB Ports2-port USB 3.0
  • Adds two internal USB 3.0 headers from one PCIe x1 slot
  • NEC UPD720201 chipset delivers 5 Gbps SuperSpeed per header
  • Works in x1, x4, x8 or x16 PCIe 2.0 lanes
  • Includes both standard and low-profile brackets for any case
  • Each 19-pin header supports two USB 3.0 ports for four total connections

Dual 19-pin USB 3.0 headers

The Yitter PCIe x1 card adds two internal 19-pin USB 3.0 headers through a single PCI Express 2.0 lane. It uses the NEC UPD720201 chipset to provide SuperSpeed connectivity for front-panel or internal devices. The card fits x1, x4, x8 or x16 slots and works with standard USB 3.0 cables and peripherals. Builders expanding internal USB connectivity will find the dual-header layout convenient.

Standard and low-profile brackets

A full-height bracket is fitted and a low-profile bracket is included in the package for slim chassis builds. Each header follows the 19-pin USB 3.0 pinout and supports 5 Gbps SuperSpeed transfer rates. The PCIe 2.0 x1 interface supplies sufficient bandwidth for both headers without additional power connectors. Installers can choose the bracket that matches their case without sourcing extra parts.

Two headers enable four ports

Each 19-pin header can break out to two USB 3.0 ports, so the card can ultimately serve up to four ports when paired with suitable cables or front-panel modules. The NEC UPD720201 controller maintains backward compatibility with existing USB 2.0 and 1.1 devices. No driver discs or software utilities are bundled; the card relies on native operating-system support. Users needing external rear-I/O ports should consider a different form factor.

Poudarki

  • Adds two internal USB 3.0 headers from one PCIe x1 slot
  • NEC UPD720201 chipset delivers 5 Gbps SuperSpeed per header
  • Works in x1, x4, x8 or x16 PCIe 2.0 lanes
  • Includes both standard and low-profile brackets for any case
  • Each 19-pin header supports two USB 3.0 ports for four total connections

Specifikacije

TypePCI Express to ExpressCard
External USB Ports2-port USB 3.0

Vprašanja o tem izdelku

What PCI Express generation and lane width does the Yitter card use, and what throughput does that cap the USB headers at?

The card runs on a PCI Express 2.0 x1 link, so each 19-pin USB 3.0 header is limited to the 5 Gbps SuperSpeed rate.

Which brackets are included so the card fits both standard and low-profile chassis?

A full-height bracket and a low-profile bracket are both supplied in the package.

How is the NEC UPD720201 chipset card installed, and what step is often missed?

Insert the card into a free PCIe x1 or larger slot, secure the chosen bracket, then connect the 19-pin headers to the motherboard — forgetting the header cables is the common mistake.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.