Zyvpee
Zyvpee 13525H12B 135mm Ball Bearing 2 Pin Case Fan
A 135mm ball-bearing case fan spinning at 1600-1999 RPM with a noise level of 30-35 dBA, powered by a 2-pin 12V DC connector
- TypeCase Fan
- CompatibilityCase
- Fan Size135mm
- Bearing TypeBall
- RPM1600-1999 RPM
- Noise Level30 - 35 dBA
- 135 mm frame fits larger case mounts
- ball bearing rated for long running life
- 4 A at 12 V draws little power
- 30–35 dBA keeps system noise low
- 1600–1999 RPM delivers strong airflow
135mm Ball Bearing Case Fan
The Zyvpee 13525H12B is a 135mm case fan built for standard chassis ventilation. It runs on a 12V DC supply drawing 0.4A through a two-pin power connector. The black frame measures 135 by 135 by 25mm and has no LED lighting.
Sustained Airflow at 1600 to 1999 RPM
Ball bearings keep friction low during continuous operation, so the fan holds its speed range without the wear that sleeve units show over time. Acoustic output stays between 30 and 35 dBA across the operating band, making it suitable for quiet builds that run long sessions.
Replaces 135mm Two-Pin Fans
This unit fits any mounting pattern cut for a 135mm frame with two-pin power. It is not for systems that require PWM speed control or three- and four-pin headers. Buyers needing variable speed tied to temperature curves should look elsewhere.
Poudarki
- 135 mm frame fits larger case mounts
- ball bearing rated for long running life
- 4 A at 12 V draws little power
- 30–35 dBA keeps system noise low
- 1600–1999 RPM delivers strong airflow
Specifikacije
| Series | 13525H12B |
|---|---|
| Model | 13525H12B |
| Type | Case Fan |
| Compatibility | Case |
| Fan Size | 135mm |
| Bearing Type | Ball |
| RPM | 1600-1999 RPM |
| Noise Level | 30 - 35 dBA |
| Power Connector | 2 Pin |
| Color | Black |
| LED | Non-LED |
| Features | DC square Cooler |
| Dimensions | 135*135*25mm |
Vprašanja o tem izdelku
How loud does the 135mm ball-bearing fan run at its 1600-1999 RPM range during all-day operation?
The fan produces 30-35 dBA at full speed, which is a quiet library-level hum even after hours of continuous use.
My motherboard only has a 2-pin header — will the 12 V 0.4 A connector fit without an adapter?
Yes, the two-pin plug connects directly to any standard 12 V motherboard header; no adapter or extra cable is needed.
Will the 135×135×25 mm frame line up with the mounting holes on my older 135 mm case opening?
The 135 mm square frame matches legacy 135 mm cut-outs, so the four corner holes align with older chassis brackets.
Tudi v tem oddelku
Stranke so primerjale tudi te
Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 $
0.00001038BTC
Na zalogi