Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Black 135mm square case fan with 2-pin power connector

Zyvpee

Zyvpee 13525H12B 135mm Ball Bearing 2 Pin Case Fan

SKU CH-7E02-H16T5

A 135mm ball-bearing case fan spinning at 1600-1999 RPM with a noise level of 30-35 dBA, powered by a 2-pin 12V DC connector

  • TypeCase Fan
  • CompatibilityCase
  • Fan Size135mm
  • Bearing TypeBall
  • RPM1600-1999 RPM
  • Noise Level30 - 35 dBA
  • 135 mm frame fits larger case mounts
  • ball bearing rated for long running life
  • 4 A at 12 V draws little power
  • 30–35 dBA keeps system noise low
  • 1600–1999 RPM delivers strong airflow

135mm Ball Bearing Case Fan

The Zyvpee 13525H12B is a 135mm case fan built for standard chassis ventilation. It runs on a 12V DC supply drawing 0.4A through a two-pin power connector. The black frame measures 135 by 135 by 25mm and has no LED lighting.

Sustained Airflow at 1600 to 1999 RPM

Ball bearings keep friction low during continuous operation, so the fan holds its speed range without the wear that sleeve units show over time. Acoustic output stays between 30 and 35 dBA across the operating band, making it suitable for quiet builds that run long sessions.

Replaces 135mm Two-Pin Fans

This unit fits any mounting pattern cut for a 135mm frame with two-pin power. It is not for systems that require PWM speed control or three- and four-pin headers. Buyers needing variable speed tied to temperature curves should look elsewhere.

Najważniejsze cechy

  • 135 mm frame fits larger case mounts
  • ball bearing rated for long running life
  • 4 A at 12 V draws little power
  • 30–35 dBA keeps system noise low
  • 1600–1999 RPM delivers strong airflow

Specyfikacja

Series13525H12B
Model13525H12B
TypeCase Fan
CompatibilityCase
Fan Size135mm
Bearing TypeBall
RPM1600-1999 RPM
Noise Level30 - 35 dBA
Power Connector2 Pin
ColorBlack
LEDNon-LED
FeaturesDC square Cooler
Dimensions135*135*25mm

Pytania dotyczące tego produktu

How loud does the 135mm ball-bearing fan run at its 1600-1999 RPM range during all-day operation?

The fan produces 30-35 dBA at full speed, which is a quiet library-level hum even after hours of continuous use.

My motherboard only has a 2-pin header — will the 12 V 0.4 A connector fit without an adapter?

Yes, the two-pin plug connects directly to any standard 12 V motherboard header; no adapter or extra cable is needed.

Will the 135×135×25 mm frame line up with the mounting holes on my older 135 mm case opening?

The 135 mm square frame matches legacy 135 mm cut-outs, so the four corner holes align with older chassis brackets.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.