Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Black 172mm square AC axial fan with metal frame and two-pin connector

Zyvpee

Zyvpee 172mm 17238 B00 220Vac 40/38W 2 Pin AC Axial Cooling Fan

SKU CH-55KY-151GG

172 mm AC axial fan runs at 2700–3200 RPM, delivers 176–211 CFM at 52–56 dB(A) via two-pin connector

  • TypeCase Fan
  • Fan Size170mm
  • Bearing TypeBall
  • Power Connector2 Pin
  • ColorBlack
  • LEDNon-LED
  • 172 mm frame fits standard server and UPS chassis
  • 220 V AC input powers the fan directly from mains supply
  • Ball bearing rated for 52–56 dB(A) operational noise
  • 176–211 CFM airflow at 2700–3200 RPM
  • Two-pin connector enables quick installation in inverter or cabinet builds

172 mm AC axial fan for UPS and server cabinets

This 172 mm AC axial fan runs on 220 V mains power and draws 40/38 W. It uses a two-pin connector and a ball bearing for continuous duty in UPS units, inverters, server cabinets and DIY enclosures. The metal frame measures 172 by 38 mm and the blade diameter is 170 mm.

Replaces worn 170 mm AC fans in 220 V equipment

When an existing 170 mm AC fan becomes noisy or stops spinning, this unit fits the same 172 mm cut-out and two-pin wiring. The upgrade is worth it when the original bearing has failed or when airflow has dropped below the 176 to 211 CFM range needed for the enclosure.

Limited to fixed-speed AC operation on 220 V mains

The fan runs at a single 2700 to 3200 RPM speed with no PWM or voltage control. Noise stays between 52 and 56 dB(A) and cannot be reduced by the host system. It requires a 220 V AC supply and a two-pin socket; it will not work on DC headers or lower voltages.

Poudarki

  • 172 mm frame fits standard server and UPS chassis
  • 220 V AC input powers the fan directly from mains supply
  • Ball bearing rated for 52–56 dB(A) operational noise
  • 176–211 CFM airflow at 2700–3200 RPM
  • Two-pin connector enables quick installation in inverter or cabinet builds

Specifikacije

Brand3ccooler.com
Series5915PC-22T-B30 B00
Model5915PC-22T-B30
TypeCase Fan
Fan Size170mm
Bearing TypeBall
Power Connector2 Pin
ColorBlack
LEDNon-LED
FeaturesAC Cooling
Dimensions172*38mm

Vprašanja o tem izdelku

Will the 172 mm by 38 mm frame and 2-pin connector fit my UPS or server chassis cut-out?

The fan measures 172 mm square by 38 mm deep with a 2-pin AC connector; verify your chassis has a matching 170 mm mounting pattern and 220 Vac supply before ordering.

How do I wire the 2-pin AC leads into a 220 Vac circuit without reversing polarity?

Connect the two pins directly to 220 Vac mains — no polarity exists on AC, but ensure the power is off and the fan is secured before energising to avoid vibration damage.

When should I replace the ball-bearing fan given its 2700 to 3200 RPM rating and 52 to 56 dB(A) noise spec?

Replace the unit once bearing noise exceeds the rated 52 to 56 dB(A) range or airflow drops below the specified 176 to 211 CFM, indicating ball-race wear.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.