Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Green 240-pin DDR3 DIMM with black memory chips and a silver label

A-Tech

A-Tech 16GB DDR3 1333MHz PC3-10600 ECC RDIMM 2Rx4 for Micron MT36JSF2G72PZ-1G4D1 Server Memory

SKU CH-3TN6-AM74H

Adds 16GB of DDR3 ECC registered memory at 1333MHz with 2Rx4 organisation for server reliability

  • Capacity16GB
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 16GB capacity expands server memory for heavier workloads
  • DDR3 1333MHz speed matches PC3-10600 system requirements
  • ECC registered design detects and corrects data errors
  • 2Rx4 dual-rank organisation optimises memory density
  • 5V standard voltage ensures broad platform compatibility

16GB DDR3 ECC RDIMM 1333MHz

This 16GB registered DIMM delivers error-correcting DDR3 memory at 1333MHz for server and workstation platforms. It operates at the standard 1.5V and uses a 2Rx4 organisation with a CL9 latency profile. The module is built with major-brand chips and carries a lifetime warranty from A-Tech.

Compatible replacement for Micron

The part is a direct equivalent for the Micron MT36JSF2G72PZ-1G4D1 module and suits systems that require registered ECC DDR3 DIMMs. Builders needing unbuffered non-ECC memory or a different voltage should look elsewhere. Capacity per slot is fixed at 16GB with this single-module kit.

240-pin DDR3 DIMM form factor

The module fits only motherboards that accept 240-pin registered DDR3 DIMMs running at 1.5V. Verifying the platform's qualified vendor list before purchase avoids compatibility issues. No other form factor or voltage is supported by this part.

I korthet

  • 16GB capacity expands server memory for heavier workloads
  • DDR3 1333MHz speed matches PC3-10600 system requirements
  • ECC registered design detects and corrects data errors
  • 2Rx4 dual-rank organisation optimises memory density
  • 5V standard voltage ensures broad platform compatibility

Specifikationer

BrandA-Tech
Capacity16GB
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Frågor om den här produkten

How can I confirm the 16GB DDR3 1333MHz module is working correctly after installation?

Enter the system BIOS or UEFI and verify the installed memory shows 16GB at 1333MHz with ECC registered status. Then run a full operating system memory test to confirm error-free operation.

What comes in the box and what must be purchased separately?

The box contains one 16GB DDR3 1333MHz PC3-10600 ECC RDIMM 2Rx4 module with 240-pin DIMM form factor. No additional components are required for installation in a compatible server or workstation.

Which version should I choose for a Micron MT36JSF2G72PZ-1G4D1 replacement?

Select this A-Tech 16GB DDR3 1333MHz PC3-10600 ECC RDIMM 2Rx4 module. It matches the Micron part number MT36JSF2G72PZ-1G4D1 with identical 1.5V voltage, CL9 latency, registered ECC design, and 240-pin DDR3 DIMM form factor.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.