Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in

A-Tech

A-Tech 16GB DDR4 2400 ECC UDIMM 2Rx8 CL17 1.2V Server Memory

SKU CH-846R-G3T90

16 GB DDR4-2400 ECC UDIMM 2Rx8 CL17 1.2 V for Micron-compatible servers

  • Capacity16GB
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • 16 GB capacity supports larger server workloads
  • DDR4 2400 speed delivers PC4-19200 bandwidth
  • ECC unbuffered design protects data integrity
  • 2Rx8 dual-rank organisation increases memory density
  • 2 V operation matches DDR4 standard voltage

16GB DDR4 ECC UDIMM for Servers

This 16GB DDR4 2400 ECC unbuffered DIMM targets servers and workstations that require error-correcting memory. It operates at 1.2V with CL17 latency and a 2Rx8 organisation. The module replaces several Micron part numbers including MTA18ASF2G72AZ-2G3A1 and MTA18ADF2G72AZ-2G3H1.

Installation is tool-free and takes seconds

Align the 288-pin edge connector with the motherboard slot and press down until the retention clips lock. Ensure the system supports DDR4 ECC unbuffered memory; inserting the module into a board that expects registered DIMMs or non-ECC memory will prevent boot. Handle only the edges to avoid static damage.

Verify your platform before ordering

Confirm the motherboard accepts 16GB unbuffered ECC UDIMMs at 2400MT/s and 1.2V. Check the qualified vendor list for the specific Micron part numbers listed above. Systems limited to registered memory, lower capacities, or different voltages will not recognise this module.

I korthet

  • 16 GB capacity supports larger server workloads
  • DDR4 2400 speed delivers PC4-19200 bandwidth
  • ECC unbuffered design protects data integrity
  • 2Rx8 dual-rank organisation increases memory density
  • 2 V operation matches DDR4 standard voltage

Specifikationer

BrandA-Tech
SeriesCompatible Replacement for Micron
ModelMTA18ASF2G72AZ-2G3A1, MTA18ASF2G72AZ-2G3B1ZI, MTA18ADF2G72AZ-2G3A1, MTA18ADF2G72AZ-2G3B1, MTA18ADF2G72AZ-2G3H1
Capacity16GB
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMicron Chipset
FeaturesMTA18ASF2G72AZ-2G3A1, MTA18ASF2G72AZ-2G3B1ZI, MTA18ADF2G72AZ-2G3A1, MTA18ADF2G72AZ-2G3B1, MTA18ADF2G72AZ-2G3H1

Frågor om den här produkten

How can I confirm the 16GB DDR4 2400 ECC UDIMM is running at CL17 1.20V after installation?

Enter the BIOS or UEFI and check the memory information screen; it should report 2400 MT/s, CL17 timings, 1.20 V and ECC enabled for the 16 GB module.

What comes in the box and do I need any extra parts to install this 288-pin DDR4 DIMM?

The box contains one 16 GB DDR4 2400 ECC UDIMM (288-pin); no additional cables, brackets or tools are required for installation in a compatible server or workstation.

Which Micron part numbers does this A-Tech 16GB 2Rx8 module replace?

It is a compatible replacement for Micron MTA18ASF2G72AZ-2G3A1, MTA18ASF2G72AZ-2G3B1ZI, MTA18ADF2G72AZ-2G3A1, MTA18ADF2G72AZ-2G3B1 and MTA18ADF2G72AZ-2G3H1.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.