Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in

A-Tech

A-Tech 16GB DDR5 4800 CL40 1.1V desktop RAM

SKU CH-X28A-R91MB

A 16 GB DDR5 desktop module running at 4800 MHz with CL40 latency and standard 1.1 V operation

  • Capacity16GB
  • SpeedDDR5 4800 (PC5 38400)
  • Tested Frequency4800
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCNo
  • 16 GB capacity expands multitasking headroom for demanding workloads
  • DDR5 4800 MHz speed delivers high bandwidth for responsive performance
  • CL40 latency at 1.1 V balances timing with standard DDR5 efficiency
  • 288-pin UDIMM form factor fits mainstream desktop memory slots
  • Major-brand chipset ensures tested reliability across compatible AMD and Intel platforms

A-Tech 16GB DDR5 4800 Desktop Memory

This 16GB DDR5 module runs at 4800MHz with a CL40 latency and standard 1.10V operation. It uses unbuffered, non-ECC chips from major brands and fits any desktop motherboard with a 288-pin DDR5 slot. The single stick adds capacity for everyday workloads and multitasking.

Build fit: 288-pin DDR5 DIMM, 1.10V standard voltage

Installation requires a motherboard with DDR5 slots; the module draws power at the standard 1.10V so no manual voltage adjustment is needed. As an unbuffered DIMM it works directly with the memory controller, leaving all remaining slots free for future expansion up to your board's limit.

Suits mainstream AMD and Intel desktop upgrades

Ideal for users replacing a failed stick or adding 16GB to a compatible DDR5 system who want tested major-brand chips and a direct Kingston KVR48U40BS8-16 equivalent. Builders needing ECC, registered modules, higher frequencies or lower latencies should consider other kits.

I korthet

  • 16 GB capacity expands multitasking headroom for demanding workloads
  • DDR5 4800 MHz speed delivers high bandwidth for responsive performance
  • CL40 latency at 1.1 V balances timing with standard DDR5 efficiency
  • 288-pin UDIMM form factor fits mainstream desktop memory slots
  • Major-brand chipset ensures tested reliability across compatible AMD and Intel platforms

Specifikationer

BrandA-Tech
Capacity16GB
SpeedDDR5 4800 (PC5 38400)
Tested Frequency4800
CAS LatencyCL40
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand Chips
FeaturesMajor Brand Chipset
Recommend UseAMD & Intel Compatible

Frågor om den här produkten

Will the CL40 latency hold back performance during long rendering jobs?

CL40 is the rated CAS latency at 4800 MT/s; the module runs at 1.1 V with standard JEDEC timings, so latency stays consistent under sustained load.

Does the stick run hot or noisy when the system is on all day?

The DIMM operates at the DDR5 standard 1.1 V with no onboard fan, so it adds minimal heat and makes no noise of its own.

What motherboard slot is required for this 288-pin DDR5 module?

A desktop DDR5 DIMM slot (288-pin) is needed; the board must support DDR5 4800 unbuffered non-ECC memory.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.