BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 US$
0.0027736BTC
I lager
A-Tech
A-Tech 192GB Kit (2 x 96GB) DDR5 5600MHz EC8 RDIMM CL40 1.1V 288-Pin Server RAM
A 192 GB dual-channel DDR5-5600 registered ECC kit with two 96 GB modules at CL40 and 1.1 V for servers and workstations
- Capacity192GB (2 x 96GB)
- SpeedDDR5 5600 (PC5 44800)
- CAS LatencyCL40
- Voltage1.10V
- ECCYes
- Buffered/RegisteredRegistered
- 192 GB total capacity from two 96 GB modules
- DDR5 5600 MHz speed with PC5-44800 bandwidth
- EC8 RDIMM with ECC registered error correction
- Low 1.10 V standard DDR5 voltage
- Dual-rank 2Rx4 organisation for server workloads
192GB DDR5 RDIMM kit for servers
This 192GB kit contains two 96GB DDR5 5600 registered ECC modules built for server and workstation platforms. The dual-rank 2Rx4 design with EC8 error correction supports data integrity in multi-socket environments. It runs at the standard 1.1V DDR5 voltage.
Upgrade from lower-capacity DDR5 RDIMMs
The jump is worthwhile when workloads exceed the capacity of smaller registered kits and the platform accepts 96GB per slot. Systems limited to lower-density modules or unbuffered memory cannot use this kit. Desktop and laptop boards are not compatible.
DDR5 5600 registered ECC constraints
The modules operate at 5600 MT/s with CL40 latency within the PC5-44800 bandwidth envelope. Registered signalling adds a cycle of buffering, so the memory controller must support RDIMM topology. EC8 ECC requires a compatible server chipset to function.
I korthet
- 192 GB total capacity from two 96 GB modules
- DDR5 5600 MHz speed with PC5-44800 bandwidth
- EC8 RDIMM with ECC registered error correction
- Low 1.10 V standard DDR5 voltage
- Dual-rank 2Rx4 organisation for server workloads
Specifikationer
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR5 Server Memory RAM |
| Model | A-Tech 192GB (2x96GB) 2Rx4 PC5-5600B-R EC8 RDIMM |
| Part Number | AT96G2D5D5600RD4N11V |
| Capacity | 192GB (2 x 96GB) |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL40 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Multi-channel Kit | Dual Channel Kit |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Features | Major Brand Chips |
Frågor om den här produkten
Will the 288-pin DDR5 RDIMM modules fit my server's DIMM slots?
Yes, each 96 GB module uses the standard 288-pin DDR5 RDIMM form factor designed for server and workstation boards that support DDR5-5600 registered memory.
What is the correct way to seat the 2Rx4 registered DIMMs so the server recognises all 192 GB?
Align the module notch with the slot key, press firmly until both retention clips click, and populate slots per the motherboard's dual-channel guide for 2Rx4 modules.
How do I know when the EC8 ECC chips on these 1.1 V modules might need replacement?
Monitor the system's corrected-error counters; a sustained rise in correctable ECC events signals chip degradation and warrants module replacement.
Även i den här avdelningen
Andra har jämfört dessa
Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.
