A-Tech
A-Tech 256GB (4x64GB) DDR4 2933 ECC RDIMM for Mac Pro 2019
A 256 GB DDR4 2933 ECC registered kit of four 64 GB modules for 2019 Mac Pro tower and rack models
- Capacity256GB (4 x 64GB)
- SpeedDDR4 2933 (PC4 23400)
- Voltage1.20V
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor Brand Chipset
- 256 GB capacity across four 64 GB modules enables heavy multitasking
- DDR4 2933 MHz speed with PC4-23400 rating accelerates data throughput
- ECC registered design detects and corrects memory errors automatically
- Validated for Mac Pro 2019 models with 12, 16, 24 and 28-core Xeon CPUs
- Low 1.20 V operation reduces power draw and heat output
256GB DDR4 2933 ECC RDIMM Kit
This 256GB kit contains four 64GB DDR4 2933MHz registered ECC modules built for the 2019 Mac Pro tower and rack models. It supports the 12, 16, 24 and 28-core Xeon W configurations listed by Apple. The modules run at 1.20V and use major-brand chips on a 288-pin RDIMM form factor.
Sustained Workload Behaviour
Registered ECC circuitry adds a clock cycle per command but corrects single-bit errors on the fly, keeping data integrity intact during long renders or large dataset processing. The 2Rx4 organisation spreads accesses across ranks, helping the memory controller maintain throughput when all twelve or more CPU cores are active for hours.
DDR4 2933 Interface Limits
The PC4-23400 rating caps peak bandwidth at the JEDEC DDR4-2933 specification, so workloads that scale beyond this transfer rate will not gain from faster modules. Four slots are populated by this kit; expanding further requires removing modules because the Mac Pro 2019 memory architecture does not expose additional DIMM sockets.
I korthet
- 256 GB capacity across four 64 GB modules enables heavy multitasking
- DDR4 2933 MHz speed with PC4-23400 rating accelerates data throughput
- ECC registered design detects and corrects memory errors automatically
- Validated for Mac Pro 2019 models with 12, 16, 24 and 28-core Xeon CPUs
- Low 1.20 V operation reduces power draw and heat output
Specifikationer
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR4 Apple Mac RAM Memory Upgrades |
| Capacity | 256GB (4 x 64GB) |
| Speed | DDR4 2933 (PC4 23400) |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major Brand Chipset |
| Compatible System | Apple Mac Systems |
| Features | Major Brand Chips |
Frågor om den här produkten
How much power does the 1.20 V DDR4 2933 RDIMM kit draw under sustained load in a 2019 Mac Pro?
Each module runs at 1.20 V; the four 64 GB sticks together draw only the standard DDR4 registered DIMM power envelope for this platform.
What must the Mac Pro already have for these four 288-pin RDIMMs to be recognised?
A Mac Pro 7,1 (2019 tower or rack) with 12, 16, 24 or 28-core Xeon W processor and macOS supporting 256 GB memory.
Will the ECC registered 2933 MHz kit run stably with the Xeon W-3275M, W-3265M, W-3245 or W-3235 CPUs?
Yes — the kit is validated for those exact 2.5 GHz, 2.7 GHz, 3.2 GHz and 3.3 GHz Xeon W processors in the 2019 Mac Pro.
Även i den här avdelningen
Andra har jämfört dessa
Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.



