Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in

A-Tech

A-Tech 2GB DDR3 1066MHz SODIMM PC3-8500 CL7 laptop RAM

SKU CH-1SSW-5FBTD

2GB DDR3 1066MHz SODIMM module for laptop memory upgrades, CL7 latency and 204-pin form factor

  • Capacity2GB
  • Type204-Pin DDR3 SO-DIMM
  • SpeedDDR3 1066 (PC3 8500)
  • CAS LatencyCL7
  • ECCNo
  • Buffered/RegisteredUnbuffered

Capacity 2GB

Genomstrukna varianter finns, men är inte i lager här.

CAS Latency CL7

  • 2GB capacity adds headroom for everyday multitasking
  • DDR3 1066MHz speed matches PC3-8500 system requirements
  • CL7 latency supports responsive application loading
  • 204-pin SODIMM form factor fits compatible laptop slots
  • Non-ECC unbuffered design suits standard notebook platforms

DDR3 2GB SODIMM upgrade

This 2GB DDR3 1066MHz SODIMM module adds memory capacity to compatible laptops, notebooks and all-in-one systems. It uses a 204-pin unbuffered non-ECC design rated at PC3-8500 with CL7 latency. The single stick suits owners of older DDR3 platforms who need a straightforward capacity increase.

Tool-free slot installation

Installation requires opening the laptop's memory compartment and pressing the module into the SO-DIMM slot until the retention clips engage; no software configuration is needed. The most common issue is a mismatch between the system's supported speed or maximum capacity and this 1066MHz 2GB specification, so verifying the manufacturer's memory list before purchase avoids a non-booting system.

Steady multitasking headroom

Under sustained workloads the module maintains its rated 1066MHz frequency and CL7 timings without throttling, because it has no heat spreader and relies on the chassis airflow. The extra 2GB lets the operating system keep more applications resident, reducing swap-file activity during long sessions rather than only improving initial load times.

I korthet

  • 2GB capacity adds headroom for everyday multitasking
  • DDR3 1066MHz speed matches PC3-8500 system requirements
  • CL7 latency supports responsive application loading
  • 204-pin SODIMM form factor fits compatible laptop slots
  • Non-ECC unbuffered design suits standard notebook platforms

Specifikationer

BrandA-Tech
SeriesA-Tech DDR3 Laptop Memory RAM
Model2GB PC3-8500 Non-ECC SODIMM
Part NumberNE-SS-0699
Capacity2GB
Type204-Pin DDR3 SO-DIMM
SpeedDDR3 1066 (PC3 8500)
CAS LatencyCL7
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitSingle Module
Heat SpreaderNo
FeaturesMajor Brand Chips
Recommend UseAMD & Intel Compatible

Andra versioner av den här modellen

5 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

How can I confirm the module is running at 1066 MHz with CL7 latency after installation?

Open Task Manager or a tool like CPU-Z and check the memory tab; it should show DDR3-1066 and CAS latency 7 when the system is idle.

What comes in the package and do I need anything else to install it?

The box contains one 2 GB 204-pin DDR3 SODIMM module; no extra parts are required, only a compatible laptop slot and a small screwdriver to open the memory cover.

Should I choose the PC3-8500 or PC3-8500S version for my notebook?

Both labels refer to the same 1066 MHz specification; pick the single 2 GB module listed as PC3-8500 / PC3-8500S — it is the only capacity offered for this part.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.