Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Green 240-pin DDR3 LRDIMM module with black chips and silver heatsink

A-Tech

A-Tech 32GB DDR3 1866 ECC LRDIMM 4Rx4 Server RAM

SKU CH-JWHT-PEWG6

A 32 GB DDR3 1866 ECC load-reduced DIMM with 4Rx4 organisation and CL13 latency for server memory expansion

  • Capacity32GB
  • SpeedDDR3 1866 (PC3 14900)
  • CAS LatencyCL13
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredLoad Reduced
  • 32 GB capacity lets servers handle heavier workloads
  • DDR3 1866 MHz speed accelerates data throughput for demanding applications
  • ECC LRDIMM with 4Rx4 rank corrects errors while reducing electrical load on the memory bus
  • CL13 latency at 1.5 V delivers responsive performance within standard DDR3 voltage
  • 240-pin DIMM form factor fits compatible server and workstation motherboards

32GB DDR3 ECC LRDIMM for Servers

This 32GB DDR3 module runs at 1866 MHz with CL13 latency and 1.5V operation. It uses a 4Rx4 load-reduced design with ECC for data integrity. The 240-pin DIMM targets server and workstation platforms that require registered memory.

Sustained load stability

Load-reduced buffering reduces electrical load on the memory controller during continuous operation. ECC corrects single-bit errors in real time to prevent data corruption. The major-brand chipset and 1.5V standard voltage support consistent throughput under heavy multi-threaded workloads.

DDR3 platform constraints

DDR3 1866 (PC3-14900) tops out at this speed grade and voltage. The 4Rx4 organisation demands a compatible memory controller and BIOS that support quad-rank LRDIMMs. Systems limited to lower speeds, standard RDIMMs, or non-ECC memory cannot use this module.

I korthet

  • 32 GB capacity lets servers handle heavier workloads
  • DDR3 1866 MHz speed accelerates data throughput for demanding applications
  • ECC LRDIMM with 4Rx4 rank corrects errors while reducing electrical load on the memory bus
  • CL13 latency at 1.5 V delivers responsive performance within standard DDR3 voltage
  • 240-pin DIMM form factor fits compatible server and workstation motherboards

Specifikationer

BrandA-Tech
Capacity32GB
SpeedDDR3 1866 (PC3 14900)
CAS LatencyCL13
Voltage1.50V
ECCYes
Buffered/RegisteredLoad Reduced
Rank4Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Frågor om den här produkten

How much power does the 1.50V DDR3 1866 module draw when the server runs continuously?

The module operates at the standard DDR3 voltage of 1.50V. Actual power draw depends on the server workload and the platform's memory controller; the DIMM itself carries no separate TDP rating.

What must the motherboard provide for this 240-pin LRDIMM to function?

The board needs DDR3 DIMM slots wired for load-reduced ECC memory, a memory controller that supports 4Rx4 organisation, and BIOS/firmware that can initialise PC3-14900 modules at 1866 MHz.

Can this CL13 1866 MHz stick run alongside slower DDR3 ECC DIMMs already installed?

If the platform supports mixed speeds, the memory controller will typically clock all populated channels down to the slowest installed module's rated frequency and tightest common timings.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.