Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Green circuit board with black memory chips, gold edge connector, no heat spreader

A-Tech

A-Tech 4GB DDR3 1333 ECC SODIMM 204-Pin 1.5V 2Rx8 CL9

SKU CH-5VRH-0T9AN

ECC SODIMM laptop memory module with 4GB capacity, DDR3 1333 speed and 1.5V operation

  • Capacity4GB
  • Type204-Pin DDR3 SO-DIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCYes

Capacity 4GB

Speed DDR3 1333 (PC3 10600)

CAS Latency CL9

  • ECC protection guards data integrity in critical workloads
  • Unbuffered DDR3 1333 MHz CL9 delivers stable server performance
  • 5 V JEDEC standard voltage ensures broad platform compatibility
  • 204-pin SO-DIMM form factor fits microserver and NAS slots
  • Dual-rank 2Rx8 organisation maximises 4 GB module density

DDR3 ECC SODIMM for Microservers

This 4 GB DDR3 1333 MHz module uses a 204-pin SO-DIMM form factor with ECC unbuffered operation. It suits microservers, mobile workstations and NAS servers that specifically require DDR3 ECC SODIMM memory. The dual-rank 2Rx8 organisation runs at the standard 1.5 V JEDEC voltage with CL9 latency.

Fits DDR3 ECC SO-DIMM slots only

The module installs directly into any 204-pin DDR3 SO-DIMM socket wired for ECC unbuffered memory. No heat spreader is fitted, leaving the board free for tight laptop or 1U chassis clearance. Systems must explicitly support ECC SODIMM; standard non-ECC DDR3 platforms will not recognise the error-correction function.

Standard-voltage DDR3 thermals

At 1.5 V the module draws typical DDR3 power without extra cooling. Passive operation means zero fan noise, and the low-profile design keeps airflow unobstructed in dense server or NAS enclosures. Heat output remains within normal DDR3 limits for continuous workloads.

I korthet

  • ECC protection guards data integrity in critical workloads
  • Unbuffered DDR3 1333 MHz CL9 delivers stable server performance
  • 5 V JEDEC standard voltage ensures broad platform compatibility
  • 204-pin SO-DIMM form factor fits microserver and NAS slots
  • Dual-rank 2Rx8 organisation maximises 4 GB module density

Specifikationer

BrandA-Tech
SeriesA-Tech DDR3 ECC SODIMM
ModelA-Tech 4GB 2Rx8 PC3-10600 ECC SODIMM
Part NumberNE-SS-0567
Capacity4GB
Type204-Pin DDR3 SO-DIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.50V
ECCYes
Buffered/RegisteredUnbuffered
Heat SpreaderNo
FeaturesECC SODIMM
Recommend UseAMD & Intel Compatible
OptionECC SODIMM

Andra versioner av den här modellen

5 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

How much power does the 1.5V DDR3 1333 module draw under sustained load?

The module operates at the JEDEC standard 1.5V for DDR3, so power draw scales with the 1333 MHz clock and 2Rx8 dual-rank density rather than exceeding the base voltage spec.

Does the ECC SODIMM run hotter or louder than non-ECC sticks when installed in a microserver chassis all day?

It has no heat spreader and runs at standard 1.5V, so thermals match other DDR3 1333 unbuffered modules; the system fan profile determines any audible difference.

What must my motherboard already support for this 204-pin DDR3 ECC SODIMM to function?

The board must accept 204-pin DDR3 SO-DIMMs, enable ECC unbuffered operation at 1333 MHz, and provide the standard 1.5V supply for dual-rank 2Rx8 modules.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.