Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Green rectangular circuit board with gold contacts and black memory chips

A-Tech

A-Tech 4GB DDR3 1600 ECC UDIMM 2Rx8 for Dell SNPWM5YYC/4G Server Memory

SKU CH-44NF-CJS4Y

4GB DDR3 1600 ECC UDIMM module with 2Rx8 organisation and CL11 latency for compatible Dell servers

  • Capacity4GB
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • ECC protection guards data integrity with built-in error correction
  • 1600 MHz DDR3 speed handles demanding server workloads
  • 2Rx8 dual-rank layout maximises 4 GB module density
  • 240-pin UDIMM form factor fits compatible Dell systems
  • 5 V standard voltage ensures efficient low-power operation

4GB DDR3 ECC UDIMM for Dell Servers

This 4GB DDR3 1600 ECC UDIMM module is built for Dell systems using part SNPWM5YYC/4G. It targets administrators maintaining compatible servers or workstations that require error-correcting unbuffered memory. The single 240-pin DIMM installs directly into standard DDR3 slots on qualified platforms.

Capacity and headroom for DDR3 workloads

The module provides 4GB of PC3-12800 memory running at 1600MHz with CL11 latency. ECC protection detects and corrects single-bit errors to maintain data integrity under sustained loads. Unbuffered design suits platforms that do not support registered DIMMs. Capacity limits appear when applications exceed the 4GB footprint per module.

Major-brand chips on a standard 240-pin build

Major-brand components are assembled on a 240-pin DDR3 PCB operating at 1.50V standard voltage. The 2Rx8 rank organisation fits the electrical layout expected by compatible Dell boards. Unbuffered signalling keeps trace routing straightforward for qualified motherboards. Lifetime warranty and US-based technical support back the module after installation.

I korthet

  • ECC protection guards data integrity with built-in error correction
  • 1600 MHz DDR3 speed handles demanding server workloads
  • 2Rx8 dual-rank layout maximises 4 GB module density
  • 240-pin UDIMM form factor fits compatible Dell systems
  • 5 V standard voltage ensures efficient low-power operation

Specifikationer

BrandA-Tech
Capacity4GB
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.50V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Frågor om den här produkten

Will this DDR3 1600 CL11 ECC UDIMM work alongside my existing DDR3 modules in a Dell server?

This module runs at DDR3 1600 (PC3-12800) with CL11 latency and 1.5V. Mixing speeds causes the system to run all modules at the slowest installed speed; verify your current modules match these specifications for best stability.

How can I confirm the 4GB 2Rx8 ECC UDIMM is recognised and running at 1600MHz after installation?

Enter the system BIOS or UEFI and check the memory information screen; it should show 4GB total capacity, 1600MHz operating speed, ECC enabled, and the module identified as unbuffered (UDIMM) with 2Rx8 organisation.

Does the single 240-pin DDR3 DIMM ship alone, or are brackets, cables or a heat spreader included?

The package contains only the 4GB DDR3 1600 ECC UDIMM module (240-pin DIMM). No brackets, cables, heat spreaders or additional accessories are supplied; the module installs directly into a compatible DDR3 DIMM slot.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.