Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in

A-Tech

A-Tech 4GB DDR3L 1600 PC3L-12800 240-Pin Samsung M379B5273DH0-YK0 Desktop RAM

SKU CH-0CHA-RZ7VP

A 4 GB DDR3L 1600 module in 240-pin DIMM form, running at 1.35 V for desktop upgrades

  • Capacity4GB
  • SpeedDDR3L 1600 (PC3L 12800)
  • Tested Frequency1600
  • Voltage1.35V
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • 4GB capacity adds responsive multitasking headroom for everyday desktop workloads
  • DDR3L 1600 speed at 1.35V lowers power draw while keeping 12800 bandwidth
  • 240-pin unbuffered DIMM fits standard desktop slots without registration overhead
  • Non-ECC design suits consumer boards that do not require error correction
  • Direct replacement for Samsung M379B5273DH0-YK0 ensures drop-in compatibility

4GB DDR3L 1600 Desktop DIMM

This 4GB DDR3L module runs at 1600MHz with a low 1.35V operating voltage. The 240-pin unbuffered design fits standard desktop DIMM slots. It is built as a direct replacement for the Samsung M379B5273DH0-YK0 part number.

Suitable for DDR3L low-voltage desktop upgrades

Systems that require DDR3L 1.35V memory at 1600MHz can use this module. Builders needing higher capacity per slot, ECC error correction, or registered buffering should look at other parts.

1.35V DDR3L voltage specification

The 1.35V low-voltage rating is the single specification that determines whether this module matches the system's memory controller requirements. Verify that the platform supports DDR3L before ordering.

I korthet

  • 4GB capacity adds responsive multitasking headroom for everyday desktop workloads
  • DDR3L 1600 speed at 1.35V lowers power draw while keeping 12800 bandwidth
  • 240-pin unbuffered DIMM fits standard desktop slots without registration overhead
  • Non-ECC design suits consumer boards that do not require error correction
  • Direct replacement for Samsung M379B5273DH0-YK0 ensures drop-in compatibility

Specifikationer

BrandA-Tech
Capacity4GB
SpeedDDR3L 1600 (PC3L 12800)
Tested Frequency1600
Voltage1.35V
ECCNo
Buffered/RegisteredUnbuffered
Recommend UseAMD & Intel Compatible

Frågor om den här produkten

Does my motherboard need a 240-pin DDR3 slot for this module?

Yes, the stick uses a 240-pin DIMM form factor and runs at DDR3L 1600 (PC3L-12800), so the board must provide a matching DDR3 slot.

Will it run correctly if I keep my existing 1.5 V DDR3 DIMMs installed?

The module operates at 1.35 V; most boards will down-volt all slots to the lowest voltage present, but stability depends on the motherboard's memory controller.

How can I confirm the kit is running at 1600 MHz after installation?

Check the memory frequency in BIOS or with a tool such as CPU-Z; it should report 1600 MT/s (PC3-12800) at 1.35 V.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.