Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Four green DDR3 server DIMMs, 240-pin, 1.5V, 64GB kit

A-Tech

A-Tech 64GB (4x16GB) DDR3 1333 ECC RDIMM 2Rx4 1.5V 240-Pin Server RAM

SKU CH-21AX-64TR4

A 64 GB quad-channel DDR3 1333 MHz ECC registered server memory kit with four 16 GB dual-rank modules at 1.5 V

  • Capacity64GB (4 x 16GB)
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered

Capacity 64GB (4 x 16GB)

Speed DDR3 1333 (PC3 10600)

  • 64GB quad-channel kit expands server memory capacity for heavier workloads
  • ECC registered DIMMs protect data integrity in mission-critical environments
  • DDR3 1333 MHz CL9 modules deliver responsive performance at standard 1.5V
  • Dual-rank x4 organisation increases density per 240-pin slot
  • Rigorously tested major-brand chips ensure dependable operation

Server memory kit for DDR3 platforms

This 64 GB kit contains four 16 GB registered DIMMs built for servers and workstations that require DDR3 1333 ECC memory. The modules operate at 1.5 V with a CAS latency of CL9 and use a dual-rank x4 organisation. They are not compatible with desktop or laptop computers.

Registered 240-pin DIMMs with ECC

Each module uses the 240-pin DDR3 form factor and includes error-correcting code plus registered buffering to reduce electrical load on the memory controller. The quad-channel kit layout supports multi-channel architectures common in server mainboards. Major-brand chips are used throughout and every module is tested before shipment.

Standard-voltage DDR3 thermals and power

Running at the standard 1.5 V DDR3 voltage, the modules draw typical power for registered DDR3 1333 memory under normal server workloads. Registered buffering and ECC add minimal overhead while maintaining signal integrity. No additional cooling beyond standard server airflow is required for rated operation.

I korthet

  • 64GB quad-channel kit expands server memory capacity for heavier workloads
  • ECC registered DIMMs protect data integrity in mission-critical environments
  • DDR3 1333 MHz CL9 modules deliver responsive performance at standard 1.5V
  • Dual-rank x4 organisation increases density per 240-pin slot
  • Rigorously tested major-brand chips ensure dependable operation

Specifikationer

BrandA-Tech
SeriesA-Tech DDR3 Server Memory RAM
ModelA-Tech 16GB 2Rx4 PC3-10600R
Capacity64GB (4 x 16GB)
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Multi-channel KitQuad Channel Kit
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Andra versioner av den här modellen

5 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

What speed does DDR3 1333 (PC3-10600) actually run at in a quad-channel server?

The modules operate at 1333 MHz with CL9 latency; the registered buffer adds one cycle of address/command delay, so sustained throughput is limited by the DDR3 1333 data rate.

Will these 240-pin RDIMMs fit a standard server DIMM slot?

Yes, each 16 GB module uses the 240-pin DDR3 DIMM form factor and the registered design matches server and workstation sockets that require RDIMMs.

How do I install the 4-module kit correctly, and what step is often missed?

Populate all four slots per the motherboard’s quad-channel guide, press each RDIMM until both ejector clips click, and verify in BIOS that all 64 GB are detected at 1333 MHz.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.