Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Green rectangular DDR3 DIMM module with black chips and gold contacts

A-Tech

A-Tech 8GB DDR3 1066MHz ECC RDIMM 4Rx8 Server Memory

SKU CH-AF9X-G94A8

8GB DDR3 1066MHz ECC registered DIMM with 4Rx8 organisation for server and workstation upgrades

  • Capacity8GB
  • SpeedDDR3 1066 (PC3 8500)
  • CAS LatencyCL3
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 8GB DDR3 1066MHz capacity expands server multitasking headroom
  • ECC registered design detects and corrects data errors automatically
  • 4Rx8 organisation maximises density within a single module slot
  • 5V standard voltage ensures broad platform compatibility
  • 240-pin DIMM form factor fits DDR3 server memory sockets

Server Memory Upgrade

This 8GB DDR3 module runs at 1066MHz (PC3-8500) with CL3 latency and 1.50V operation. It is built as an ECC registered DIMM using a 4Rx8 organisation for error-correcting server and workstation platforms. The 240-pin form factor fits standard DDR3 DIMM slots in compatible systems.

Elpida Replacement Compatibility

The module is specified as a compatible replacement for the Elpida EBJ82RF8BCFA-AE-F part number. Builders can use it to match existing memory configurations that require this exact Elpida reference. Verification of the host system's supported memory specifications remains essential before installation.

DDR3 Interface Limits

DDR3 technology tops out at lower transfer rates and higher voltages than later generations. Registered DIMMs add a clock cycle of latency and require chipset support for buffered operation. The 4Rx8 density may exceed the rank-per-channel limits of some older memory controllers. 8GB capacity per module restricts total system memory on platforms with few DIMM slots.

I korthet

  • 8GB DDR3 1066MHz capacity expands server multitasking headroom
  • ECC registered design detects and corrects data errors automatically
  • 4Rx8 organisation maximises density within a single module slot
  • 5V standard voltage ensures broad platform compatibility
  • 240-pin DIMM form factor fits DDR3 server memory sockets

Specifikationer

BrandA-Tech
SeriesCompatible Replacement for Elpida
ModelEBJ82RF8BCFA-AE-F
Capacity8GB
SpeedDDR3 1066 (PC3 8500)
CAS LatencyCL3
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx8
ChipsetMajor Brand Chipset
FeaturesEBJ82RF8BCFA-AE-F

Frågor om den här produkten

How often will the 4Rx8 registered ECC chips need replacement in a 24/7 server?

DDR3 ECC RDIMM modules have no scheduled replacement interval; they run until a correctable error rate rises or a hard failure occurs, which typically takes many years in normal server workloads.

What is the first limit reached when this PC3-8500 module runs at full 1066 MHz load continuously?

The 1.50 V DDR3 standard voltage and 4Rx8 organisation set the thermal and signal-integrity ceiling; sustained maximum bandwidth will hit the JEDEC-defined timing and temperature envelope before any other constraint.

How much heat and power does the 240-pin 8 GB stick produce when it runs all day?

At 1.50 V the module draws only the power required for DDR3 1066 operation; registered buffering adds negligible overhead, so heat output stays within standard DIMM thermal limits for enclosed server chassis.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.