Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Green rectangular circuit board with gold edge connectors and black memory chips

A-Tech

A-Tech 8GB DDR4 2666MHz ECC RDIMM 1Rx8 Server Memory

SKU CH-F1J4-FZKWS

An 8 GB DDR4 2666 MHz ECC registered DIMM with CL19 latency and 1.2 V operation for server or workstation upgrades

  • Capacity8GB
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 8GB capacity expands server multitasking headroom
  • DDR4 2666MHz speed accelerates data throughput
  • ECC RDIMM design detects and corrects memory errors
  • Registered 1Rx8 architecture stabilises heavy workloads
  • 2V operation matches standard DDR4 voltage

Server Memory Upgrade

This A-Tech module is an 8GB DDR4 2666MHz ECC Registered DIMM built as a compatible replacement for Hynix HMA81GR7CFR8N-VK and HMA81GR7MFR8N-VK. It runs at PC4-21300 speed with CL19 latency and standard 1.20V voltage. The 1Rx8 rank configuration fits server and workstation platforms that require registered memory.

Suitable For Verified Systems

Administrators replacing a failed Hynix stick or adding capacity to a qualified server chassis will find this module matches the original specifications. Buyers who need a different capacity per slot, a non-ECC unbuffered DIMM, or a faster data rate should look elsewhere. Compatibility must be confirmed against the system vendor's qualified memory list before purchase.

Registered ECC DDR4 2666MHz

The decisive specification is the Registered ECC DDR4 2666MHz (PC4-21300) interface with 1Rx8 organisation. Only systems designed for registered error-correcting modules at this exact speed can use it.

I korthet

  • 8GB capacity expands server multitasking headroom
  • DDR4 2666MHz speed accelerates data throughput
  • ECC RDIMM design detects and corrects memory errors
  • Registered 1Rx8 architecture stabilises heavy workloads
  • 2V operation matches standard DDR4 voltage

Specifikationer

BrandA-Tech
SeriesCompatible Replacement for Hynix
ModelHMA81GR7CFR8N-VK, HMA81GR7MFR8N-VK
Capacity8GB
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor Brand Chipset
FeaturesHMA81GR7CFR8N-VK, HMA81GR7MFR8N-VK

Frågor om den här produkten

My motherboard uses DDR4 RDIMM slots — will this 288-pin module fit?

Yes, the module is a standard DDR4 DIMM with 288 pins that matches DDR4 RDIMM slots.

Can I add this ECC RDIMM to a system that already has non-ECC UDIMMs installed?

No, registered ECC modules cannot be mixed with unbuffered non-ECC memory; the system requires all slots to use registered ECC DIMMs.

How do I confirm the module is running at 2666 MHz with ECC active after installation?

Check the BIOS memory information or use a tool such as CPU-Z to verify 2666 MT/s speed, CL19 timings and ECC status.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.