A-Tech
A-Tech Supermicro Certified Hynix HMAA4GR7AJR8N-XN 32GB DDR4 3200 ECC RDIMM 2Rx8
32 GB DDR4 3200 ECC registered RDIMM, CL22 at 1.2 V, dual-rank 2Rx8 with 288 pins, Supermicro certified
- Capacity32GB
- SpeedDDR4 3200 (PC4 25600)
- CAS LatencyCL22
- Voltage1.20V
- ECCYes
- Buffered/RegisteredRegistered
- Supermicro certified for guaranteed server compatibility
- 32 GB DDR4 3200 dual-rank ECC RDIMM
- CL22 latency at 1.2 V standard voltage
- 288-pin registered module with Hynix chipset
- Lifetime warranty with US-based technical support
Certified Server Memory
This is a 32GB DDR4 3200MHz ECC Registered DIMM built to Supermicro MEM-DR432MD-ER32 specifications using Hynix components. It delivers 32GB of capacity at PC4-25600 speed with CL22 latency and 1.20V operation for compatible server platforms.
System Builders And IT Managers
This module suits administrators expanding memory in qualified Supermicro servers that require registered ECC RDIMMs. It is not for desktop PCs or workstations that accept only unbuffered non-ECC memory, nor for systems limited to lower densities or different form factors.
Registered ECC RDIMM Form Factor
The 288-pin RDIMM design with 2Rx8 organisation and on-board register is the single specification that determines fit; only motherboards wired for registered ECC DDR4 can use this module.
I korthet
- Supermicro certified for guaranteed server compatibility
- 32 GB DDR4 3200 dual-rank ECC RDIMM
- CL22 latency at 1.2 V standard voltage
- 288-pin registered module with Hynix chipset
- Lifetime warranty with US-based technical support
Specifikationer
| Brand | SuperMicro |
|---|---|
| Series | Supermicro Certified |
| Model | MEM-DR432MD-ER32 |
| Capacity | 32GB |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Features | Supermicro Certified MEM-DR432MD-ER32 (HMAA4GR7AJR8N-XN) |
Frågor om den här produkten
What slot type and pin count does this 32GB DDR4 3200 RDIMM require?
This module uses a 288-pin RDIMM form factor designed for DDR4 server memory slots.
How is the module seated, and what step is often missed?
Align the notch with the slot key, press firmly until both side clips click into the locking notches on the PCB.
When should this ECC registered DIMM be replaced?
Replace the module if the system logs uncorrectable ECC errors or fails memory diagnostics during POST.
Även i den här avdelningen
Andra har jämfört dessa
Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.



