Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Open-frame diode laser engraver on metal gantry, 420 by 400 mm bed

ACMER

ACMER P2-20W laser engraver

SKU CH-B5VA-4JWYP

A 20W diode laser engraver with a 420 x 400 mm work area, 0.01 mm accuracy and 30,000 mm/min top speed for wood, acrylic, leather and metal

Option 20W

Genomstrukna varianter finns, men är inte i lager här.

  • 20W laser output cuts stainless steel, wood, metal, acrylic and leather
  • 420 × 400 mm working area fits large projects
  • 30,000 mm/min top speed finishes jobs quickly
  • 01 mm accuracy with 0.001 mm repeatability ensures fine detail
  • 08 × 0.06 mm compressed spot produces realistic engravings

20W Diode Laser Engraver

The ACMER P2-20W is a diode laser engraver and cutter with a 20000mW output and a 455±5nm wavelength. It uses laser coupling technology and a 5mm focal length to produce a compressed spot of 0.08mm x 0.06mm. The machine suits makers and small workshops that need a single unit for cutting and engraving tasks.

420x400mm Work Area and 30000mm/min Speed

The engraver provides a 420mm by 400mm working area framed by industrial guide rails for 0.01mm accuracy and 0.001mm repeatable positioning. Maximum engraving speed reaches 30000mm/min, so throughput is limited by that motion ceiling and the fixed 20W optical power. Material thickness and density beyond the laser's cutting capacity will require multiple passes or cannot be processed.

Cuts Wood and Acrylic; Marks Coated Metals

The 20W diode comfortably cuts wood, bamboo, paper, acrylic and leather within the 420x400mm bed. It can engrave coated or painted metals such as anodised aluminium or stainless steel marking spray. It does not cut bare stainless steel or thick metal stock, so buyers needing deep metal cutting or higher wattage for faster throughput should consider the 33W variant.

I korthet

  • 20W laser output cuts stainless steel, wood, metal, acrylic and leather
  • 420 × 400 mm working area fits large projects
  • 30,000 mm/min top speed finishes jobs quickly
  • 01 mm accuracy with 0.001 mm repeatability ensures fine detail
  • 08 × 0.06 mm compressed spot produces realistic engravings

Specifikationer

BrandACMER
ModelP2-20W

Andra versioner av den här modellen

1 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

Should I choose the 10W, 20W or 33W version of the ACMER P2?

The 20W model delivers 20000mW output power and a 420×400mm work area, matching the 10W and 33W versions for size and 30000mm/min top speed. Pick 10W for lighter materials, 20W for general metal and wood, or 33W for faster deep cuts.

What does the 20000mW output power mean when I am actually cutting or engraving?

At 20000mW the diode laser (455±5nm wavelength, 5mm focal length) produces a 0.08×0.06mm compressed spot, enabling clean cuts in stainless steel, wood, acrylic and leather at up to 30000mm/min with 0.01mm accuracy.

What interface or standard connects the ACMER P2 to my computer and what does it limit?

The machine uses a standard USB connection for G-code streaming; the 30000mm/min motion ceiling and 0.001mm repeatable positioning are set by the onboard controller and industrial guide rails, not by the USB link.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.