NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.
AFRNDK
SHA-256 ASIC miner delivers 90 TH/s at 3250 W with 36 J/TH efficiency, runs on 200–240 V power and connects via RJ45 Ethernet
The AFRNDK Bitmain Antminer S19 delivers a nominal 90 TH/s hashrate for Bitcoin, Bitcoin Cash and Bitcoin SV mining. It draws 3250 W at the wall with a rated efficiency of 36 J/TH, operating on 200–240 V AC input at 47–63 Hz. Four integrated fans produce 76 dB of noise while keeping the unit within its 0–40 °C operating range.
The miner requires a 220 V supply; incorrect voltage can damage the hardware. Power tolerance is ±5 % on both consumption and efficiency figures, and hashrate varies by ±3 %. Network access is limited to a single RJ45 Ethernet port running at 10/100 Mbit/s, so upstream bandwidth above 100 Mbit/s cannot be used.
Replacing older SHA-256 machines such as the T19 or S17 series raises hashrate per unit while improving energy efficiency toward the 36 J/TH mark. The jump is worthwhile when electricity cost per kilowatt-hour makes the efficiency gain large enough to offset the higher upfront capital outlay. Operators without 200–240 V infrastructure or adequate cooling for 76 dB noise should not deploy this model.
| Brand | BITMAIN |
|---|---|
| Series | S19 |
| Model | S19 90T |
| Type | Mining Barebone System |
| Crypto Algorithm | SHA 256 |
| Compatible Currency | Bitcoin (BTC) |
| Mining Hardware | ASIC |
| Hashrate | 90TH/S |
| Noise level | 76dB |
| Fan | 4 |
| Power Consumption | 3250W |
The 90 TH/s model delivers 90 ±3% TH/s at 3250 ±5% W, yielding 36 ±5% J/TH efficiency. Lower-hashrate units such as the S17 series run at reduced throughput and different efficiency, while higher-hashrate variants draw more power and require matching cooling.
At 90 ±3% TH/s and 3250 ±5% W wall power, the miner produces roughly 36 J/TH. Actual BTC earned depends on network difficulty, pool fees, and electricity cost; the hashrate figure sets the upper bound before those variables apply.
The Ethernet link tops out at 100 Mbit/s, which is far above the few Mbit/s needed for stratum traffic, so the interface does not cap hashrate. Ensure the switch and cabling support 100 Mbit/s full duplex for stable connectivity.
Även i den här avdelningen
Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.
Det du betalar med, och det du ser priserna i.
Skickas från din plånbok i kassan
Endast visning — katalogen är prissatt i US-dollar
Ingen valuta matchar.
Välj det språk du vill att webbplatsen ska visas på.
Ny här?
Har du redan ett konto?
Det finns ingen automatisk återställning: den här butiken skickar inga e-postmeddelanden, så det finns ingen engångslänk att begära. Lämna adressen kopplad till kontot, så hanteras den för hand.
Förfrågan noterad
Inget är på väg till din inkorg — den här butiken skickar aldrig e-post. Någon tar hand om detta manuellt.
Kom du på det?