Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Open black steel test bench frame with handle, supports M-ATX and ITX boards, no side panels

ALAMENGDA

ALAMENGDA Open Test Bench M-ATX PC Case

SKU CH-ZRBX-5WYJM

Open test bench for M-ATX and ITX builds with steel frame, integrated handle and support for 360 mm water cooling

  • TypeATX Mini Tower
  • ColorBlack
  • Case Materialhigh-quality SPCC steel plate, the surface is baked with bla
  • With Power SupplyNo
  • Power Supply MountedBottom
  • Side Panelwithout Side Window

Options Max (Black)

  • Open test bench for M-ATX and ITX builds
  • Sturdy 0.8 mm SPCC steel frame with sand-grain finish
  • Standard ATX power supply mounts at front or rear
  • Fits graphics cards up to 256 mm long
  • Supports 360 mm radiator and can stand or lie flat

Open test bench for M-ATX and ITX boards

This open test bench accepts motherboards up to 305 by 245 millimetres, covering M-ATX and ITX form factors. The frame is built from .8 millimetre SPCC steel with a black sand-grain paint finish. It ships without a power supply and has no side window.

Check motherboard size

Verify that your board fits within the 305 by 245 millimetre limit and that you need only one 3.5 inch and one 2.5 inch drive bay. The bench supports a standard ATX power supply up to 250 millimetres deep. Graphics card length is unrestricted by the frame.

Stands or lies flat and clears 360 millimetre

The unit can be used upright or laid down and includes a stainless handle with an industrial control startup cable. It accommodates radiators up to 360 millimetres and leaves GPU width and length completely open. Installed dimensions are 440 by 265 by 128 millimetres, growing to 160 millimetres tall with a power supply fitted.

I korthet

  • Open test bench for M-ATX and ITX builds
  • Sturdy 0.8 mm SPCC steel frame with sand-grain finish
  • Standard ATX power supply mounts at front or rear
  • Fits graphics cards up to 256 mm long
  • Supports 360 mm radiator and can stand or lie flat

Specifikationer

BrandALAMENGDA
TypeATX Mini Tower
ColorBlack
Case Materialhigh-quality SPCC steel plate, the surface is baked with black sand grain paint
With Power SupplyNo
Power Supply MountedBottom
Side Panelwithout Side Window
Internal 3.5" Drive Bays2
Internal 2.5" Drive Bays2
Max GPU Lengththe length and width of graphics cards are not limited
Max PSU Lengthstandard ATX power supply

Andra versioner av den här modellen

2 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

What comes in the box and what must I buy separately?

The package includes the open test bench frame with a stainless steel handle and an industrial control startup cable. You must supply an M-ATX or ITX motherboard, a standard ATX power supply, graphics card, memory, storage drives and cooling.

Which version should I choose between the ATX and EATX models?

Choose the ATX model for motherboards up to 305×245 mm, supporting one 2.5" SSD and one 3.5" HDD, weighing 1.0 kg. Choose the EATX model for boards up to 305×330 mm, supporting two SSDs and two HDDs, weighing 1.2 kg.

What does the 256 mm graphics-card limit mean in practice?

Any graphics card up to 256 mm long will fit; the open design imposes no width restriction. The bench also accepts a standard ATX PSU measuring 150×86×(140-250) mm and can accommodate a 360 mm radiator for liquid cooling.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.