Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Black tower CPU cooler with single 120mm fan and aluminium fin stack

ARCTIC COOLING

ARCTIC COOLING Freezer i35 CO ACFRE00095A CPU cooler

SKU CH-CNBN-SHVDY MPN ACFRE00095A

Tower air cooler for Intel LGA 1700, 1200 and 115X sockets with a 120 mm dual-ball-bearing fan up to 1800 rpm and MX-5 paste included

  • TypeFan & Heatsinks
  • Fan Size120mm
  • CPU Socket CompatibilityIntel LGA 1150 / Intel LGA 1151 / Intel LGA 1155 / Intel LGA
  • Bearing Type2 Ball
  • RPMmax 1800rpm
  • Power Connector4 Pin
  • Broad Intel socket support covers LGA 1700, 1200 and 115X platforms
  • Dual ball-bearing fan rated for 1800 rpm maximum speed
  • Low noise output of 0.35 sone at full load
  • Compact 159 mm tower height fits most cases
  • Pre-applied MX-5 thermal compound (0.8 g) included

Intel LGA 1700 tower cooler

The ARCTIC Freezer i35 CO is a single-tower air cooler built for Intel sockets from LGA 1150 through LGA 1700. It fits mainstream desktop builds that need reliable thermal performance without liquid cooling complexity.

120 mm dual-ball-bearing fan

A 120 mm fan with dual ball bearings spins up to 1800 rpm and connects via a 4-pin PWM header for automatic speed control. Vertical mounting on the heatsink keeps the cooler 159 mm tall, leaving standard RAM clearance unrestricted.

MX-5 paste included

The bundle supplies a 0.8 g syringe of MX-5 thermal compound so the cooler can be installed immediately. No additional brackets or software utilities are provided in the package.

I korthet

  • Broad Intel socket support covers LGA 1700, 1200 and 115X platforms
  • Dual ball-bearing fan rated for 1800 rpm maximum speed
  • Low noise output of 0.35 sone at full load
  • Compact 159 mm tower height fits most cases
  • Pre-applied MX-5 thermal compound (0.8 g) included

Specifikationer

BrandARCTIC COOLING
ModelFreezer i35
Part NumberACFRE00095A
TypeFan & Heatsinks
Fan Size120mm
CPU Socket CompatibilityIntel LGA 1150 / Intel LGA 1151 / Intel LGA 1155 / Intel LGA 1156 / Intel LGA 1200 / Intel LGA 1700
Bearing Type2 Ball
RPMmax 1800rpm
Power Connector4 Pin
Fan Mounting Types to HeatsinkVertical
Max CPU Cooler Height159 mm
Heatsink DimensionsItem Height: 6.25
Item Length: 3.59
Item Width: 5.24
WeightMore than 450g
Fraktvikt0.11 kg
Paketstorlek102 × 102 × 102 mm

Frågor om den här produkten

How does the 4-pin PWM connector limit fan control?

The 4-pin PWM connector allows the motherboard to regulate speed between 0 and 1800 RPM, so the fan stops at low load and spins up only when the CPU temperature demands it.

What clearance does the 159 mm cooler height and vertical fan mounting require in the case?

The tower stands 159 mm tall with the 120 mm fan mounted vertically, so the case must provide at least that much CPU-cooler clearance and enough width for the 120 mm fan frame.

Which steps are needed to mount the cooler on an Intel LGA 1700 socket using the included MX-5 paste?

Apply the 0.8 g MX-5 syringe to the CPU, place the Intel-specific retention bracket over the LGA 1700 socket, secure the tower with the supplied screws, then plug the 4-pin header into the CPU_FAN connector.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.