Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Compact silver metal FLEX ATX server PSU, rectangular with fan grille and cable bundle

Athena Power

Athena Power AP-MFATX60P868 FLEX ATX 600W server power supply

SKU CH-M2JG-QQAZA

FLEX ATX 600 W unit for SFF and 1 U servers, active PFC, 80Plus Bronze efficiency, 250 000 h MTBF, IEC 62368-1 certified, 150 × 81.5 × 40.5 mm

  • TypeATX
  • Single/RedundantSingle
  • Maximum Power600W
  • Main Connector20+4Pin
  • Output Current+3.3V@18A, +5V@20A,12V1/V2@24/24A, [email protected] , [emai
  • Output+3.3V, +5V,12V1/V2, -12V, +5Vsb
  • 600 W output powers demanding server builds
  • 80Plus Bronze efficiency cuts energy waste at any load
  • Active PFC with 90–264 V input ensures stable power worldwide
  • Compact 150 × 81.5 × 40.5 mm flex-ATX fits 1 U and mini-ITX cases
  • IEC/UL/CSA/EN 62368-1 certification meets US, Canada and EU safety rules

Compact 600 W FLEX ATX supply

The Athena Power AP-MFATX60P868 is a single-unit FLEX ATX power supply rated at 600 W. It fits small-form-factor chassis such as mini-ITX builds or 1U IPC servers. The unit accepts 90 – 264 V AC input at 47 – 63 Hz with active power factor correction. Safety certifications include IEC, UL, CSA and EN 62368-1 compliance.

Sustained-load behaviour

Efficiency exceeds 80 % across high and low loads, meeting the 80Plus Bronze standard. Mean time between failures is rated at 250,000 hours at full load and 25 °C ambient. Protections cover over-current, over-voltage, short-circuit and overload conditions. Hold-up time is at least 11 ms at nominal input, and output rise time stays below 70 ms.

Installation notes

Dimensions are 150 x 81.5 x 40.5 mm, weighing 3.75 lbs. The exhaust fan uses a 12 V DC motor with thermal speed control. Connectors provided: one 20+4-pin ATX, one EPS 8-pin plus one 4+4-pin EPS, two PCIe 6+2-pin, three SATA 15-pin, two Molex 4-pin and one floppy 4-pin. Builders needing additional PCIe or SATA leads beyond these counts will require adapters or a different unit.

I korthet

  • 600 W output powers demanding server builds
  • 80Plus Bronze efficiency cuts energy waste at any load
  • Active PFC with 90–264 V input ensures stable power worldwide
  • Compact 150 × 81.5 × 40.5 mm flex-ATX fits 1 U and mini-ITX cases
  • IEC/UL/CSA/EN 62368-1 certification meets US, Canada and EU safety rules

Specifikationer

BrandAthena Power
ModelAP-MFATX60P868
TypeATX
Single/RedundantSingle
Maximum Power600W
Main Connector20+4Pin
Output Current+3.3V@18A, +5V@20A,12V1/V2@24/24A, [email protected] , [email protected]
Output+3.3V, +5V,12V1/V2, -12V, +5Vsb
Input Voltage90 - 264 V
Input Frequency Range47 - 63 Hz
Input Current9.0A@110V, 4.5A@ 240V
MTBF250,000 Hours on Maximum Load at +25 degree C
Efficiency> 80%
Hold-up Time11 ms Minimum at Nominal Input Voltage
ProtectionOCP, OVP,
FeaturesRise time: Less than 70 ms
Dimensions(L x W x H) 150 x 81.50 x 40.5 mm/ 6 x 3.2 x 1.59 in
Weight3.75 lbs
Humidity20%-90%
TemperatureOperating: 0°C ~ +55°C on Full Load; Storage & Shipping: -40°C ~ +70°C

Frågor om den här produkten

How loud or hot does the 12V exhaust fan run when the 600W unit is at full load all day?

The 12V exhaust fan uses a thermal speed controller, so noise and heat rise with load; the unit is rated for 0°C to 55°C operating temperature at full load.

What cables or motherboard headers must I already have to connect the 20+4Pin ATX, dual EPS-12V and two PCIe 6+2Pin plugs?

You need a motherboard with a 20+4Pin ATX socket, one 8Pin and one 4+4Pin EPS-12V header, plus two PCIe 6+2Pin sockets for graphics cards.

Will the 150×81.5×40.5mm Flex ATX form factor and 20+4Pin main connector fit my older mini-ITX case and board?

Yes, it complies with the Flex ATX-12V and EPS-12V standards, so it matches legacy mini-ITX cases and boards using the 20+4Pin ATX connector.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.