Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Translucent red 120 mm case fan with four red LEDs and 15 blades

BGears

BGears B-PWM 120 RED 120mm case fan 2000 RPM 110 CFM 37.3 dBA

SKU CH-TQA8-WBZ5H MPN B-PWM 120 RED

A 120 mm PWM case fan with 15 translucent red blades, red LEDs, and a two-ball bearing spins 500–2000 RPM to move 110 CFM at 37.3 dBA

  • Fan Counts1 Fan
  • Fan ControllerNo Controller
  • TypeCase Fan
  • CompatibilityCase
  • Fan Size120mm
  • Fan Thickness25mm

LED Red

  • 15 aerodynamic blades push 110 CFM for strong case cooling
  • 2 ball bearing rated for high-speed reliability at 2000 RPM
  • PWM control from 500 to 2000 RPM balances airflow and noise
  • 3 dBA at full speed keeps system acoustics low
  • Four red LEDs with translucent blades add visible lighting inside the chassis

Bgears 120mm PWM case fan

The Bgears B-PWM 120 RED is a 120mm case fan built for builders who want strong airflow with PWM speed control. It uses a two-ball bearing and fifteen translucent red blades to move up to 110 CFM at 2000 RPM. Four red LEDs provide lighting inside the chassis.

Installing the 4-pin PWM fan

The fan includes a mini 4-pin connector for motherboard headers and a 3-to-4-pin Molex adapter for direct PSU power. Four mounting screws are supplied. The 25mm thickness fits standard 120mm mounts, though cable routing can be tight in compact cases.

Suited for high-airflow builds

This fan suits users who prioritise maximum airflow and red LED styling over absolute silence. At 37.3 dBA the noise is noticeable at full speed. Buyers needing quieter operation or different colour schemes should look elsewhere.

I korthet

  • 15 aerodynamic blades push 110 CFM for strong case cooling
  • 2 ball bearing rated for high-speed reliability at 2000 RPM
  • PWM control from 500 to 2000 RPM balances airflow and noise
  • 3 dBA at full speed keeps system acoustics low
  • Four red LEDs with translucent blades add visible lighting inside the chassis

Specifikationer

BrandBgears
Modelb-PWM 120 Red
Fan Counts1 Fan
Fan ControllerNo Controller
TypeCase Fan
CompatibilityCase
Fan Size120mm
Fan Thickness25mm
Bearing Type2 Ball
RPM2000 RPM
Air Flow110 CFM
Power Connector4 Pin
ColorRed
LEDRed
Fraktvikt0.17 kg
Paketstorlek204 × 144 × 39 mm

Andra versioner av den här modellen

2 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

How do I confirm the fan is running correctly once installed?

Connect the 4-pin PWM header to the motherboard and use BIOS or monitoring software to verify the speed reads between 500 and 2000 RPM while the four red LEDs stay lit.

What comes in the package and what must I provide separately?

The box contains the 120 mm fan with 15 translucent red blades, four red LEDs, four mounting screws and a 3-to-4-pin Molex adapter; you only need a free 4-pin fan header or Molex connector from the power supply.

Should I choose the 2000 RPM model or a lower-speed version?

This model is the single 2000 RPM variant rated at 110 CFM and 37.3 dBA; select it when you want maximum airflow with PWM control down to 500 RPM for quieter idle operation.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.